Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for MM clock controllers for Glymur

[Akhil P Oommen]

On 3/3/2026 11:22 PM, Taniya Das wrote:
> Add the device nodes for the multimedia clock controllers videocc, gpucc
> and gxclkctl.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> Signed-off-by: Taniya Das <taniya.das@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/glymur.dtsi | 42 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
> index e269cec7942c85447892c0661f83171eded94f3b..d9c37f43397f11a527279ee778769a2f09745bd5 100644
> --- a/arch/arm64/boot/dts/qcom/glymur.dtsi
> +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
> @@ -5,7 +5,10 @@
>  
>  #include <dt-bindings/clock/qcom,glymur-dispcc.h>
>  #include <dt-bindings/clock/qcom,glymur-gcc.h>
> +#include <dt-bindings/clock/qcom,glymur-gpucc.h>
>  #include <dt-bindings/clock/qcom,glymur-tcsr.h>
> +#include <dt-bindings/clock/qcom,glymur-videocc.h>
> +#include <dt-bindings/clock/qcom,kaanapali-gxclkctl.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/gpio/gpio.h>
> @@ -3335,6 +3338,29 @@ hsc_noc: interconnect@2000000 {
>  			#interconnect-cells = <2>;
>  		};
>  
> +		gxclkctl: clock-controller@3d64000 {
> +			compatible = "qcom,glymur-gxclkctl";
> +			reg = <0x0 0x03d64000 0x0 0x6000>;
> +
> +			power-domains = <&rpmhpd RPMHPD_GFX>,
> +					<&rpmhpd RPMHPD_GMXC>,
> +					<&gpucc GPU_CC_CX_GDSC>;
> +
> +			#power-domain-cells = <1>;
> +		};
> +
> +		gpucc: clock-controller@3d90000 {
> +			compatible = "qcom,glymur-gpucc";
> +			reg = <0x0 0x03d90000 0x0 0x9800>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				<&gcc GCC_GPU_GPLL0_CLK_SRC>,
> +				<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> +

Missing power-domains and required-opp properties here.

-Akhil

> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		ipcc: mailbox@3e04000 {
>  			compatible = "qcom,glymur-ipcc", "qcom,ipcc";
>  			reg = <0x0 0x03e04000 0x0 0x1000>;
> @@ -3367,6 +3393,22 @@ lpass_ag_noc: interconnect@7e40000 {
>  			#interconnect-cells = <2>;
>  		};
>  
> +		videocc: clock-controller@aaf0000 {
> +			compatible = "qcom,glymur-videocc";
> +			reg = <0x0 0x0aaf0000 0x0 0x10000>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK_A>;
> +
> +			power-domains = <&rpmhpd RPMHPD_MMCX>,
> +					<&rpmhpd RPMHPD_MXC>;
> +			required-opps = <&rpmhpd_opp_low_svs>,
> +					<&rpmhpd_opp_low_svs>;
> +
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
>  		dispcc: clock-controller@af00000 {
>  			compatible = "qcom,glymur-dispcc";
>  			reg = <0x0 0x0af00000 0x0 0x20000>;
>