[PATCH v4 1/2] PCI: AtomicOps: Do not enable if root-port capabilities are unknown

[Gerd Bayer]

When inspecting the config space of a Connect-X physical function in an
s390 system after it was initialized by the mlx5_core device driver, we
found the function to be enabled to request AtomicOps despite the
system's root-complex lacking support for completing them:

1ed0:00:00.1 Ethernet controller: Mellanox Technologies MT2894 Family [ConnectX-6 Lx]
	Subsystem: Mellanox Technologies Device 0002
  [...]
	DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		 AtomicOpsCtl: ReqEn+
		 IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq-
		 10BitTagReq- OBFF Disabled, EETLPPrefixBlk-

Turns out the device driver calls pci_enable_atomic_ops_to_root() which
defaulted to enable AtomicOps requests even if it had no information
about the root-port that the PCIe device is attached to.

Change to logic of pci_enable_atomic_ops_to_root() to fully traverse the
PCIe tree upwards, check that the bridge devices support delivering
AtomicOps transactions, and finally check that there is a root-port at
the end that does support completing AtomicOps.

Do not enable AtomicOps requests if nothing can be learned about how the
device is attached - e.g. if it is on an "isolated" bus, as in s390.

Reported-by: Alexander Schmidt <alexs@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()")
Signed-off-by: Gerd Bayer <gbayer@xxxxxxxxxxxxx>
---
 drivers/pci/pci.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8479c2e1f74f1044416281aba11bf071ea89488a..94e90988df86b3278b1b6abbc326abf9b4a4a962 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3676,7 +3676,7 @@ void pci_acs_init(struct pci_dev *dev)
 int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
 {
 	struct pci_bus *bus = dev->bus;
-	struct pci_dev *bridge;
+	struct pci_dev *bridge = NULL;
 	u32 cap, ctl2;
 
 	/*
@@ -3714,29 +3714,27 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask)
 		switch (pci_pcie_type(bridge)) {
 		/* Ensure switch ports support AtomicOp routing */
 		case PCI_EXP_TYPE_UPSTREAM:
-		case PCI_EXP_TYPE_DOWNSTREAM:
-			if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTE))
-				return -EINVAL;
-			break;
-
-		/* Ensure root port supports all the sizes we care about */
-		case PCI_EXP_TYPE_ROOT_PORT:
-			if ((cap & cap_mask) != cap_mask)
-				return -EINVAL;
-			break;
-		}
-
-		/* Ensure upstream ports don't block AtomicOps on egress */
-		if (pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM) {
+			/* Upstream ports must not block AtomicOps on egress */
 			pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2,
 						   &ctl2);
 			if (ctl2 & PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK)
 				return -EINVAL;
+			fallthrough;
+		/* All switch ports need to route AtomicOps */
+		case PCI_EXP_TYPE_DOWNSTREAM:
+			if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTE))
+				return -EINVAL;
+			break;
 		}
-
 		bus = bus->parent;
 	}
 
+	/* Finally, last bridge must be root port and support requested sizes */
+	if ((!bridge) ||
+	    (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) ||
+	    ((cap & cap_mask) != cap_mask))
+		return -EINVAL;
+
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
 				 PCI_EXP_DEVCTL2_ATOMIC_REQ);
 	return 0;

-- 
2.51.0