Re: [PATCH v7 0/2] Add support for Variscite DART-MX95 and Sonata board

[Frank Li]

On Fri, Mar 13, 2026 at 06:47:01PM +0100, Stefano Radaelli wrote:
> This patch series adds support for the Variscite DART-MX95 system on
> module and the Sonata carrier board.
>
> The series includes:
> - Device tree bindings documentation for both SOM and carrier board
> - SOM device tree with on-module peripherals
> - Sonata carrier board device tree with board-specific features
>
> The implementation follows the standard SOM + carrier board pattern
> where the SOM dtsi contains only peripherals mounted on the module,
> while carrier-specific interfaces are enabled in the board dts.
>
> v7:
> - Order nodes in symphony dts

Can you run https://github.com/lznuaa/dt-format for new file to easy
track and check by script later.

Frank

> v6:
> - Order by node name instead of by label
> v5:
> - Fix newlines and nodes order
> v4:
> - Fix typo in spacing
> - Remove vpu and cm7 reserved memory
> - Add GPIO_OPEN_DRAIN to i2c gpios
> - Move pinmux to eof
> v3:
> - Fix specific node names with generic ones
> - Remove fixed-link property for SFP
> - Audio regulator cleanup
> v2:
> - Add SFP cage node for enetc_port2 following sff,sfp.yaml binding
>
> Stefano Radaelli (2):
>   arm64: dts: freescale: Add support for Variscite DART-MX95
>   arm64: dts: imx95-var-dart: Add support for Variscite Sonata board
>
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../dts/freescale/imx95-var-dart-sonata.dts   | 591 ++++++++++++++++++
>  .../boot/dts/freescale/imx95-var-dart.dtsi    | 425 +++++++++++++
>  3 files changed, 1017 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
>
>
> base-commit: 40fbbd64bba6c6e7a72885d2f59b6a3be9991eeb
> prerequisite-patch-id: 7ed0e453f554c70d0fafd5147d4d9b62cac6c10f
> --
> 2.47.3
>