Re: [PATCH v3 1/2] dt-bindings: hwmon: moortec,mr75203: adapt multipleOf for T-Head TH1520

[Guenter Roeck]

On 3/15/26 05:12, Conor Dooley wrote:
> On Sat, Mar 14, 2026 at 09:56:27AM -0700, Drew Fustini wrote:
> > On Tue, Mar 10, 2026 at 12:24:56AM +0800, Icenowy Zheng wrote:
> > > The G and J coefficients provided by T-Head TH1520 manual (which calls
> > > them A and C coefficients and calls H coefficient in the binding as B)
> > > have 1/100 degree Celsius precision (the values are 42.74 and -0.16
> > > respectively), however the binding currently only allows coefficients as
> > > precise as 100 milli-Celsius (1/10 degree Celsius).
> > >
> > > Change the multipleOf value of these two coefficients to 10 (in the unit
> > > of milli-Celsius) to satisfy the need of TH1520.
> > >
> > > Signed-off-by: Icenowy Zheng <zhengxingda@xxxxxxxxxxx>
> > > Reviewed-by: Drew Fustini <fustini@xxxxxxxxxx>
> > > ---
> > > Changes in v3:
> > > - Added Drew's R-b.
> > > - Fixed some typos in the commit message and slightly reworded the
> > >    precision sentence.
> > >
> > >   Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 4 ++--
> > >   1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > index 56db2292f062d..7d57c2934a8a1 100644
> > > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > @@ -105,7 +105,7 @@ properties:
> > >         G coefficient for temperature equation.
> > >         Default for series 5 = 60000
> > >         Default for series 6 = 57400
> > > -    multipleOf: 100
> > > +    multipleOf: 10
> > >       minimum: 1000
> > >       $ref: /schemas/types.yaml#/definitions/uint32
> > >   
> > > @@ -131,7 +131,7 @@ properties:
> > >         J coefficient for temperature equation.
> > >         Default for series 5 = -100
> > >         Default for series 6 = 0
> > > -    multipleOf: 100
> > > +    multipleOf: 10
> > >       maximum: 0
> > >       $ref: /schemas/types.yaml#/definitions/int32
> > >   
> > > --
> > > 2.52.0
> >
> > I have applied this to thead-dt-for-next.
>
> That's odd, why is a hwmon binding in your branch?
>
> > https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux.git/commit/?h=thead-dt-for-next&id=eb4fd43ff6793681f0a0a8e8ac861142caba2b19
>
> I don't see an ack on it from the relevant maintainer either?

I don't get it either. Normally I am the one to apply hwmon bindings
through the hwmon branch.

Guenter