Re: [PATCH v2 3/3] arm64: dts: qcom: qcs6490-rb3gen2: Enable CAN bus controller

[Konrad Dybcio]

On 3/16/26 2:19 PM, Viken Dadhaniya wrote:
> Enable the MCP2518FD CAN controller on the QCS6490 RB3 Gen2 platform.
> The controller is connected via SPI3 and uses a 40 MHz oscillator.
> 
> The setup was tested with CAN-FD loopback and actual data transfer
> using an external PCAN-USB FD adapter.
> 
> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad