Re: [PATCH v2 1/2] dt-bindings: arm: qcom: Add monaco-evk-ac support

[Umang Chheda]

On 4/4/2026 1:58 AM, Dmitry Baryshkov wrote:
> On Fri, Apr 03, 2026 at 04:14:28PM +0530, Umang Chheda wrote:
>> Hello Dmitry,
>>
>> On 4/1/2026 5:06 PM, Dmitry Baryshkov wrote:
>>> On Wed, Apr 01, 2026 at 12:14:42AM +0530, Umang Chheda wrote:
>>>> Introduce bindings for the monaco-evk-ac IoT board, which is
>>>> based on the monaco-ac (QCS8300-AC) SoC variant.
>>>
>>> If it is a different SoC SKU, should it be reflected in the SoC compat
>>> strings?
>>
>> Monaco‑AC does not introduce any S/W differences compared to Monaco SoC
>> -- All IP blocks and bindings remain identical from S/W PoV, Hence
>> haven't included the SoC SKU in the SoC compat strings.
>>
>> Hope this is okay ? Your view on this ?
> 
> You are descibing -AC as the main difference between the kits, but then
> you say that -AC doesn't bring new software interfaces. What is the
> difference then between monako-evk and the -ac variant?
> 

The major difference between monaco-evk and monaco-ac-evk boards is that
of power grid. monaco-evk requires 4 PMICs (2x PM8650AU + Maxim MAX20018
+ TI TPS6594) to support higher power requirements of monaco-AA variant
of SoC which supports upto 40 TOPS of NPU - whereas this board
"monaco-ac-evk" supports 20 TOPS of NPU and has lesser power
requirements hence 2 PMICs suffice the power requirements (2x PM8650AU).


> Also, from the naming point of view, it is monako-ac-evk, not the other
> way.

Ack, will change this to "monaco-ac-evk" in the next version.

Also, should I change DT name "monaco-ac-sku.dts" instead of current
"monaco-evk-ac-sku" ?

> 
>>
>>>
>>>>
>>>> Signed-off-by: Umang Chheda <umang.chheda@xxxxxxxxxxxxxxxx>
>>>> ---
>>>>  Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>>>> index ca880c105f3b..c76365a89687 100644
>>>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>>>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>>>> @@ -918,6 +918,7 @@ properties:
>>>>            - enum:
>>>>                - arduino,monza
>>>>                - qcom,monaco-evk
>>>> +              - qcom,monaco-evk-ac
>>>>                - qcom,qcs8300-ride
>>>>            - const: qcom,qcs8300
>>>>  
>>>>
>>>> -- 
>>>> 2.34.1
>>>>
>>>
>>
>> Thanks,
>> Umang
> 

Thanks,
Umang