[PATCH] arm64: dts: imx93-9x9-qsb: Add tianma,tm050rdh03 panel

From: Liu Ying

Date: Tue Apr 07 2026 - 05:15:58 EST

Support tianma,tm050rdh03 DPI panel on i.MX93 9x9 QSB.

The panel connects with the QSB board through an adapter board[1]
designed by NXP.

Link: https://www.nxp.com/design/design-center/development-boards-and-designs/parallel-lcd-display:TM050RDH03-41 [1]
Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi | 110 +++++++++++++++++++++
.../imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso | 106 +-------------------
.../freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso | 14 +++
4 files changed, 127 insertions(+), 105 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 711e36cc2c99..6315fb8390ff 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -455,9 +455,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
imx93-9x9-qsb-can1-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-can1.dtbo
imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
imx93-9x9-qsb-ontat-kd50g21-40nt-a1-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtbo
+imx93-9x9-qsb-tianma-tm050rdh03-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-tianma-tm050rdh03.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-can1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-tianma-tm050rdh03.dtb

dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-frdm.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi
new file mode 100644
index 000000000000..d167c9fc3b8f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&pcal6524 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel {
+ compatible = "ontat,kd50g21-40nt-a1";
+ backlight = <&backlight>;
+ power-supply = <&reg_rpi_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dpi_to_panel>;
+ };
+ };
+ };
+};
+
+&dpi_bridge {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dpi_to_panel: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <18>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e
+ MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e
+ MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e
+ MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e
+ MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x31e
+ MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x31e
+ MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x31e
+ MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x31e
+ MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x31e
+ MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x31e
+ MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x31e
+ MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x31e
+ MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x31e
+ MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x31e
+ MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e
+ MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e
+ MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e
+ MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e
+ MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e
+ MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e
+ MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e
+ MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e
+ >;
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&media_blk_ctrl {
+ status = "okay";
+};
+
+&pcal6524 {
+ /*
+ * exp-sel-hog has property 'output-low' while DT overlay doesn't
+ * support /delete-property/. Both 'output-low' and 'output-high'
+ * will exist under hog nodes if DT overlay file sets 'output-high'.
+ * Workaround is to disable this hog and create new hog with
+ * 'output-high'.
+ */
+ exp-sel-hog {
+ status = "disabled";
+ };
+
+ exp-high-sel-hog {
+ gpio-hog;
+ gpios = <22 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&sai3 {
+ /* disable due to GPIO12 and GPIO17~20 pin conflicts with LCDIF */
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso
index d167c9fc3b8f..356533a7b513 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtso
@@ -3,108 +3,4 @@
* Copyright 2026 NXP
*/

-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx93-pinfunc.h"
-
-&{/} {
- backlight: backlight {
- compatible = "gpio-backlight";
- gpios = <&pcal6524 2 GPIO_ACTIVE_HIGH>;
- };
-
- panel {
- compatible = "ontat,kd50g21-40nt-a1";
- backlight = <&backlight>;
- power-supply = <&reg_rpi_3v3>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dpi_to_panel>;
- };
- };
- };
-};
-
-&dpi_bridge {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dpi_to_panel: endpoint {
- remote-endpoint = <&panel_in>;
- bus-width = <18>;
- };
- };
- };
-};
-
-&iomuxc {
- pinctrl_lcdif: lcdifgrp {
- fsl,pins = <
- MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e
- MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e
- MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e
- MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e
- MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x31e
- MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x31e
- MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x31e
- MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x31e
- MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x31e
- MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x31e
- MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x31e
- MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x31e
- MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x31e
- MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x31e
- MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e
- MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e
- MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e
- MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e
- MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e
- MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e
- MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e
- MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e
- >;
- };
-};
-
-&lcdif {
- status = "okay";
-};
-
-&media_blk_ctrl {
- status = "okay";
-};
-
-&pcal6524 {
- /*
- * exp-sel-hog has property 'output-low' while DT overlay doesn't
- * support /delete-property/. Both 'output-low' and 'output-high'
- * will exist under hog nodes if DT overlay file sets 'output-high'.
- * Workaround is to disable this hog and create new hog with
- * 'output-high'.
- */
- exp-sel-hog {
- status = "disabled";
- };
-
- exp-high-sel-hog {
- gpio-hog;
- gpios = <22 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&sai3 {
- /* disable due to GPIO12 and GPIO17~20 pin conflicts with LCDIF */
- status = "disabled";
-};
+#include "imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso
new file mode 100644
index 000000000000..c233797ec28c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-tianma-tm050rdh03.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-9x9-qsb-ontat-kd50g21-40nt-a1.dtsi"
+
+&{/} {
+ panel {
+ compatible = "tianma,tm050rdh03";
+ enable-gpios = <&pcal6524 8 GPIO_ACTIVE_HIGH>;
+ };
+};

---
base-commit: 816f193dd0d95246f208590924dd962b192def78
change-id: 20260407-tianma-tm050rdh03-imx93-9x9-qsb-6e4bbbde3d08

Best regards,
--
Liu Ying <victor.liu@xxxxxxx>