Re: [GIT PULL] thermal drivers changes for v7.1-rc1

[Rafael J. Wysocki]

Hi Daniel,

On Thu, Apr 9, 2026 at 10:18 PM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Rafael,
>
> The following changes since commit 1f318b96cc84d7c2ab792fcc0bfd42a7ca890681:
>
>    Linux 7.0-rc3 (2026-03-08 16:56:54 -0700)
>
> are available in the Git repository at:
>
>
> ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v7.1-rc1
>
> for you to fetch changes up to bf746e2a41efd98668c97759e06d436ae5af5a82:
>
>    thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
> (2026-04-09 21:47:15 +0200)
>
> ----------------------------------------------------------------
> - Added an OF node address to output message to make sensor names more
>    distinguishable (Alexander Stein)
>
> - Added hwmon support for the i.MX97 thermal sensor (Alexander Stein)
>
> - Clamped correctly the results when doing value/temperature conversion
>    in the Spreadtrum driver (Thorsten Blum)
>
> - Added the SDM670 compatible DT bindings for the Tsens and the lMH
>    drivers (Richard Acayan)
>
> - Added the SM8750 compatible DT bindings for the Tsens (Manaf
>    Meethalavalappu Pallikunhi)
>
> - Added the Eliza SoC compatible DT bindings for the Tsens (Krzysztof
>    Kozlowski)
>
> - Fixed inverted condition check on error in the Spear driver (Gopi
>    Krishna Menon)
>
> - Converted the DT bindings documentation into DT schema (Gopi Krishna
>    Menon)
>
> - Used max() macro to increase readibility in the Broadcom STB thermal
>    sensor (Thorsten Blum)
>
> - Removed stale @trim_offset kernel-doc entry (John Madieu)
>
> ----------------------------------------------------------------
> Alexander Stein (2):
>        thermal/of: Add OF node address to output message
>        thermal/drivers/imx91: Add hwmon support
>
> Gopi Krishna Menon (2):
>        thermal/drivers/spear: Fix error condition for reading
> st,thermal-flags
>        dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
>
> John Madieu (1):
>        thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
>
> Krzysztof Kozlowski (1):
>        dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
>
> Manaf Meethalavalappu Pallikunhi (1):
>        dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature
> Sensor
>
> Richard Acayan (2):
>        dt-bindings: thermal: tsens: add SDM670 compatible
>        dt-bindings: thermal: lmh: Add SDM670 compatible
>
> Thorsten Blum (4):
>        thermal/drivers/sprd: Fix temperature clamping in
> sprd_thm_temp_to_rawdata
>        thermal/drivers/sprd: Fix raw temperature clamping in
> sprd_thm_rawdata_to_temp
>        thermal/drivers/sprd: Use min instead of clamp in
> sprd_thm_temp_to_rawdata
>        thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
>
>   .../devicetree/bindings/thermal/qcom-lmh.yaml      |  3 ++
>   .../devicetree/bindings/thermal/qcom-tsens.yaml    |  3 ++
>   .../devicetree/bindings/thermal/spear-thermal.txt  | 14 ---------
>   .../bindings/thermal/st,thermal-spear1340.yaml     | 36
> ++++++++++++++++++++++
>   drivers/thermal/broadcom/brcmstb_thermal.c         |  8 ++---
>   drivers/thermal/imx91_thermal.c                    |  4 +++
>   drivers/thermal/renesas/rzg3e_thermal.c            |  1 -
>   drivers/thermal/spear_thermal.c                    |  2 +-
>   drivers/thermal/sprd_thermal.c                     |  6 ++--
>   drivers/thermal/thermal_of.c                       | 20 ++++++------
>   10 files changed, 63 insertions(+), 34 deletions(-)
>   delete mode 100644
> Documentation/devicetree/bindings/thermal/spear-thermal.txt
>   create mode 100644
> Documentation/devicetree/bindings/thermal/st,thermal-spear1340.yaml

Pulled and added to linux-pm.git/linux-next, thanks!