[PATCH v2 3/4] arm64: dts: mediatek: mt7988a-bpi-r4pro: update gpio-leds

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

On the official case the red LED is named ERR, the blue LED is named ACT.​​​​​​​​​​​​​​​​
Reflect these labels in function and set them default off.

Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
v2:
- dropped default-state as suggested by daniel
---
 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi
index 759f608d1081..bbd6c16a8cb0 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi
@@ -61,14 +61,14 @@ gpio-leds {
 
 		led_red: sys-led-red {
 			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_FAULT;
 			gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
 		};
 
 		led_blue: sys-led-blue {
 			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_ACTIVITY;
 			gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
 		};
 	};
 
-- 
2.43.0