Re: [PATCH RFC v3 1/9] dt-bindings: iio: frequency: add ad9910

[Jonathan Cameron]

On Fri, 17 Apr 2026 09:17:30 +0100
Rodrigo Alencar via B4 Relay <devnull+rodrigo.alencar.analog.com@xxxxxxxxxx> wrote:

> From: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>
> 
> DT-bindings for AD9910, a 1 GSPS DDS with 14-bit DAC. It includes
> configurations for clocks, DAC current, reset and basic GPIO control.
> 
> Signed-off-by: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>
> ---
>  .../bindings/iio/frequency/adi,ad9910.yaml         | 189 +++++++++++++++++++++
>  MAINTAINERS                                        |   7 +
>  2 files changed, 196 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml
> new file mode 100644
> index 000000000000..61e879bca5c2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml

...

> +
> +  reset-gpios:
> +    description:
> +      GPIOs controlling the Main Device reset.
> +
> +  io-reset-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO controlling the I/O_RESET pin.
> +
> +  powerdown-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO controlling the EXT_PWR_DWN pin.
> +
> +  update-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO controlling the I/O_UPDATE pin.
> +
> +  profile-gpios:
> +    minItems: 3
> +    maxItems: 3
> +    description:
> +      GPIOs controlling the PROFILE[2:0] pins for profile selection.
> +
> +  sync-err-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO used to read SYNC_SMP_ERR pin status.
Looking at the datasheet there are a few other things that might want to be here.

pll-lock for example might be wired to a gpio to allow a check that lock has
occurred.  Maybe sync-samp-err as well though possibly that one wants to be an
interrupt?