[PATCH v1] arm64: dts: monac-arduino-monza: Add Bluetooth UART node

[Shuai Zhang]

enable bt on monac-arduino-monza

Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxxxxxxxx>
Signed-off-by: Shuai Zhang <shuai.zhang@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
index ca14f0ea4..092ca0b59 100644
--- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
@@ -21,6 +21,7 @@ aliases {
 		ethernet0 = &ethernet0;
 		i2c1 = &i2c1;
 		serial0 = &uart7;
+		serial1 = &uart10;
 	};
 
 	chosen {
@@ -454,6 +455,16 @@ &uart7 {
 	status = "okay";
 };
 
+&uart10 {
+	status = "okay";
+	bluetooth: bluetooth {
+		compatible = "qcom,qca2066-bt";
+		max-speed = <3200000>;
+		enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
 &usb_1 {
 	status = "okay";
 };
-- 
2.34.1