[PATCH v6 2/4] dt-bindings: hwmon: Add Sensirion SHT30 series

[Zaixiang Xu]

Add YAML devicetree binding schema for Sensirion SHT30 series and the
compatible GXCAS GXHT30 sensors.

Use fallback compatibles for compatible chips and add optional
interrupts and vdd-supply properties.

Signed-off-by: Zaixiang Xu <zaixiang.xu.dev@xxxxxxxxx>
---
 .../bindings/hwmon/sensirion,sht30.yaml       | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml
new file mode 100644
index 000000000000..9b120f8d303c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,sht30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHT3x and GXCAS GXHT30 humidity and temperature sensors
+
+maintainers:
+  - Zaixiang Xu <zaixiang.xu.dev@xxxxxxxxx>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sensirion,sht30
+          - sensirion,sht31
+          - sensirion,sht35
+          - sensirion,sht85
+          - sensirion,sts30
+          - sensirion,sts31
+          - sensirion,sts32
+          - sensirion,sts35
+      - items:
+          - const: gxcas,gxht30
+          - const: sensirion,sht30
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the VDD pin.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the nRESET pin. Active low.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt connected to the ALERT pin.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity-sensor@44 {
+            compatible = "gxcas,gxht30", "sensirion,sht30";
+            reg = <0x44>;
+            vdd-supply = <&vcc_3v3_reg>;
+            reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
-- 
2.34.1