Re: [PATCH v2 4/4] arm64: dts: qcom: add IPQ9650 SoC and rdp488 board support

[Kathiravan Thirumoorthy]

On 4/29/2026 8:54 PM, Kathiravan Thirumoorthy wrote:
> +		qupv3: geniqup@1ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x01ac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
> +				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
> +			clock-names = "m-ahb", "s-ahb";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			uart1: serial@1a98000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x01a98000 0x0 0x4000>;
> +				clocks = <&gcc GCC_QUPV3_WRAP_SE6_CLK>;
> +				clock-names = "se";
> +				interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH 0>;
> +				status = "disabled";

Sorry,  I was careful enough but still missed the \n. Will take care of 
this in next spin along with if any other comments. If not, can I take 
this up in the next set of series?

> +			};
> +		};