[PATCH] pci: quirks: Advertise D3cold capability for UPD720201

[Sushrut Shree Trivedi]

PCIe-to-USB bridge UPD720201 does not advertise D3cold
support until firmware is loaded post pci enumeration.
This results in upd blocking D3cold entry during system
suspend and causing overall failure to enter XO
shutdown.

Hence, add a quirk to advertise D3cold PME capability
since the HW actually supports and advertises it post
firmware loading.

Signed-off-by: Sushrut Shree Trivedi <sushrut.trivedi@xxxxxxxxxxxxxxxx>
---
 drivers/pci/quirks.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index caaed1a01dc0..c32617ed33aa 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -6381,3 +6381,13 @@ static void pci_mask_replay_timer_timeout(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9750, pci_mask_replay_timer_timeout);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9755, pci_mask_replay_timer_timeout);
 #endif
+
+/*
+ * Renesas PCIe-to-USB bridge UPD720201 does not advertise D3cold
+ * capability by default until firmware is loaded post-enumeration.
+ */
+static void quirk_enable_d3cold(struct pci_dev *dev)
+{
+	dev->pme_support = dev->pme_support | (1 << PCI_D3cold);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RENESAS, 0x0014, quirk_enable_d3cold);

---
base-commit: 0787c45ea08a13b5482e701fabc741877cf681f6
change-id: 20260430-d3cold_support-36dcf6011571

Best regards,
-- 
Sushrut Shree Trivedi <sushrut.trivedi@xxxxxxxxxxxxxxxx>