[PATCH 0/5] Add USB driver and binding changes for Qualcomm Shikra SoC

[Komal Bajaj]

This series adds Driver and binding changes for USB controllers on
Shikra. There are two USB controllers - One of them is SS capable
and other is HS only capable. The ss Phy init sequence is same as
that of Talos.

Signed-off-by: Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>
---
Krishna Kurapati (5):
      dt-bindings: usb: qcom,snps-dwc3: Add Shikra compatible
      dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
      dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for Shikra
      phy: qcom-qusb2: Add support for Shikra
      phy: qcom: qmp-usbc: Add qmp configuration for Shikra

 .../bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml          |  2 ++
 .../devicetree/bindings/phy/qcom,qusb2-phy.yaml          |  1 +
 .../devicetree/bindings/usb/qcom,snps-dwc3.yaml          |  3 +++
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c                 |  3 +++
 drivers/phy/qualcomm/phy-qcom-qusb2.c                    | 16 ++++++++++++++++
 5 files changed, 25 insertions(+)
---
base-commit: 39704f00f747aba3144289870b5fd8ac230a9aaf
change-id: 20260430-shikra-usb-1fc0d3f9c117

Best regards,
-- 
Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>