Re: [regression] ctxfi: no speaker output when headphones connected on >=7.0.x

[Harin Lee]

On 5/6/26 4:05 PM, Takashi Iwai wrote:
> On Wed, 06 May 2026 08:24:36 +0200,
> Thorsten Leemhuis wrote:
> > Hi! Just FYI, I noticed a regression report in bugzilla:
> >
> > https://bugzilla.kernel.org/show_bug.cgi?id=221461
> >
> > To quote:
> >
> > > Dutch Ingraham 2026-05-03 18:12:49 UTC
> > >
> > > Kernels >=7.0.1 contain a regression as to Creative Sound Blaster Z SE
> > > discrete pci sound card, but not integrated. Kernels 7.0.1, 7.0.2, and
> > > 7.0.3 tested; 7.0.0 not tested. Reverting to any 6.18.x or 6.12.x does
> > > not present the issue.
> > >
> > > Specifically, using pipewire managed by pavucontrol, on both Gentoo and
> > > Arch Linux, when both external speakers and headphones are connected,
> > > all sound is routed through the headphones regardless of whether settings
> > > are set to Line Out/Speaker or Line Out/Headphones; there is no speaker
> > > output. If headphones are disconnected, without reboot, speakers work;
> > > reconnect headphones, without reboot, sound reverts to headphones.
> > >
> > > Kernel: 7.0.3, Gentoo compiled from source using olddefconfig on 6.18.24
> > > 		.config; Arch standard release
> > > 'lspci -nnk | grep -i audio' attached
> > > 'dmesg | grep -i audio' for 7.0.3 and 6.18.24 attached
> > > pipewire-1.6.4 on both Gentoo and Arch Linux
> > > alsa-firmware-1.2.4 on both Gentoo and Arch Linux
> > > 'cat /proc/sys/kernel/tainted' returns 0 for both Gentoo and Arch Linux
> > >
> > > Processor		:	AMD Ryzen7 5700G
> > > Motherboard		:	Asus Prime X570-Pro
> > > RAM				:	Patriot Viper Steel DDR-4 @3200mHz
> > > Graphics        :   ASRock AMD Radeon RX 7600 Challenger 8GB OC
> > > Sound Card      :   Creative Sound Blaster Z SE
> > >
> > >
> > > Expected outcome: ability to choose output to either speakers or head-
> > > phones while both are plugged-in to sound card.
> > >
> > > Workaround: none known.
> >
> > See the ticket for more details. One of them: 7.1-rc2 is affected as
> > well. Reporter is CCed. Forwarded this to ensure this report makes it to
> > the interested parties, as bugzilla might not have forwarded this.
> >
> > Dutch Ingraham: if nobody within a few days has an idea why this
> > happens, you will likely have to use a git bisection to get this resolved.
>
> As there have been many significant changes in ctxfi since 6.18, it's
> hard to tell what broke.  Please go git bisect.
>
>
> thanks,
>
> Takashi

Creative Sound Blaster Z-series uses the snd_hda_codec_ca0132 driver,
not snd_ctxfi. The dmesg logs in the bugzilla shows only ca0132
entries.

Thanks,
Harin Lee