Re: [PATCH 0/2] scsi: smartpqi: fix PCIe hot reset recovery

[Laurence Oberman]

On Wed, 2026-05-06 at 14:01 +0000, Mateusz Nowicki wrote:
> A PCIe bus reset (e.g. "echo 1 > /sys/bus/pci/devices/<bdf>/reset")
> on a
> controller without FLR support leaves the HPE SR932i-p Gen10+
> unusable
> until reboot: smartpqi registers no pci_error_handlers, so the driver
> is not notified, firmware reverts to SIS mode, and all queue mappings
> are dropped while the driver still drives PQI.
> 
> Patch 1 adds .reset_prepare / .reset_done reusing
> pqi_ofa_ctrl_quiesce() / _unquiesce() / pqi_ctrl_init_resume().
> 
> Patch 2 raises SIS_CTRL_READY_RESUME_TIMEOUT_SECS from 90s to 180s,
> matching the cold-boot path; without this patch 1 fails at the SIS
> ready check because firmware boot after reset takes ~125s on the
> SR932i-p Gen10+.
> 
> Tested on HPE SR932i-p Gen10+ against Linus' master at 74fe02ce122a.
> 
> Note: the From: header is my Posteo address because my employer's
> SMTP
> is unavailable for external mailing lists.  The Signed-off-by carries
> the Microchip attribution.
> 
> Mateusz Nowicki (2):
>   scsi: smartpqi: add pci_error_handlers for bus reset recovery
>   scsi: smartpqi: increase SIS ctrl ready resume timeout to 180s
> 
>  drivers/scsi/smartpqi/smartpqi_init.c | 47
> +++++++++++++++++++++++++++
>  drivers/scsi/smartpqi/smartpqi_sis.c  |  2 +-
>  2 files changed, 48 insertions(+), 1 deletion(-)
> 
> --
> 2.43.0
> 
> 
> 
Hello

I did reproduce this so I am testing the patches as well.
They look correct to me, I will reply again after testing with a
review.

Thanks
Laurence


[2513778.140012] smartpqi 0000:64:00.0: no heartbeat detected - last
heartbeat count: 4207808511
[2513778.140031] smartpqi 0000:64:00.0: controller offline: reason code
0x4 (no controller heartbeat detected)
[2513778.141346] sd 1:0:0:0: [sda] tag#549 FAILED Result:
hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=18s
[2513778.141355] sd 1:0:0:0: [sda] tag#550 FAILED Result: 

"xfs_buf_ioend_handle_error+0xd5/0x3f0 [xfs]" at daddr 0x9f78 len 8
error 5
[2513778.141526] XFS (dm-0): log I/O error -5