Re: [PATCH v2 2/2] media: i2c: imx471: Add Sony IMX471 image sensor driver
From: Kate Hsuan
Date: Fri May 08 2026 - 04:53:08 EST
Hi Sakari,
Thank you for reviewing the patch.
On Wed, May 6, 2026 at 3:15 PM Sakari Ailus <sakari.ailus@xxxxxx> wrote:
>
> Hi Kate,
>
> Thanks for the update. Please see my comments below.
>
> On Tue, May 05, 2026 at 02:13:27PM +0800, Kate Hsuan wrote:
> > Add a new driver for Sony imx471 camera sensor. It is based on
> > Jimmy Su <jimmy.su@xxxxxxxxx> implementation and the driver can be found
> > in the following URL.
> > https://github.com/intel/ipu6-drivers/commits/master/drivers/media/i2c/imx471.c
> >
> > This sensor can be found on Lenovo X9-14 and X9-15 laptop and it is a part
> > of IPU7 solution. The driver was tested on Lenovo X9-14 and X9-15 laptops.
> >
> > Link: https://github.com/intel/ipu6-drivers/blob/master/drivers/media/i2c/imx471.c
> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=2454119
>
> I'm not sure we need these links. But the extra newline here should go in
> any case.
If these links are unnecessary, I'll drop them.
>
> >
> > Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
> > ---
> > MAINTAINERS | 6 +
> > drivers/media/i2c/Kconfig | 10 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/imx471.c | 992 +++++++++++++++++++++++++++++++++++++
> > 4 files changed, 1009 insertions(+)
> > create mode 100644 drivers/media/i2c/imx471.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 1126fdd639ad..d597337e7c24 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -24735,6 +24735,12 @@ T: git git://linuxtv.org/media.git
> > F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
> > F: drivers/media/i2c/imx415.c
> >
> > +SONY IMX471 SENSOR DRIVER
> > +M: Kate Hsuan <hpa@xxxxxxxxxx>
> > +L: linux-media@xxxxxxxxxxxxxxx
> > +S: Maintained
> > +F: drivers/media/i2c/imx471.c
> > +
> > SONY MEMORYSTICK SUBSYSTEM
> > M: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
> > M: Alex Dubov <oakad@xxxxxxxxx>
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 5eb1e0e0a87a..1c28c498a9f1 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -287,6 +287,16 @@ config VIDEO_IMX415
> > To compile this driver as a module, choose M here: the
> > module will be called imx415.
> >
> > +config VIDEO_IMX471
> > + tristate "Sony IMX471 sensor support"
> > + select V4L2_CCI_I2C
> > + help
> > + This is a Video4Linux2 sensor driver for the Sony
> > + IMX471 camera.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called imx471.
> > +
> > config VIDEO_MAX9271_LIB
> > tristate
> >
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index a3a6396df3c4..0539e9171030 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -61,6 +61,7 @@ obj-$(CONFIG_VIDEO_IMX335) += imx335.o
> > obj-$(CONFIG_VIDEO_IMX355) += imx355.o
> > obj-$(CONFIG_VIDEO_IMX412) += imx412.o
> > obj-$(CONFIG_VIDEO_IMX415) += imx415.o
> > +obj-$(CONFIG_VIDEO_IMX471) += imx471.o
> > obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
> > obj-$(CONFIG_VIDEO_ISL7998X) += isl7998x.o
> > obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
> > diff --git a/drivers/media/i2c/imx471.c b/drivers/media/i2c/imx471.c
> > new file mode 100644
> > index 000000000000..e340d803ca9d
> > --- /dev/null
> > +++ b/drivers/media/i2c/imx471.c
> > @@ -0,0 +1,992 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (C) 2025 Intel Corporation
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/unaligned.h>
> > +#include <media/v4l2-cci.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#define IMX471_REG_MODE_SELECT CCI_REG8(0x0100)
> > +#define IMX471_MODE_STANDBY 0x00
> > +#define IMX471_MODE_STREAMING 0x01
> > +
> > +/* Chip ID */
> > +#define IMX471_REG_CHIP_ID CCI_REG16(0x0016)
> > +#define IMX471_CHIP_ID 0x0471
> > +
> > +/* V_TIMING internal */
> > +#define IMX471_REG_FLL CCI_REG16(0x0340)
> > +#define IMX471_FLL_MAX 0xffff
> > +
> > +/* Exposure control */
> > +#define IMX471_REG_EXPOSURE CCI_REG16(0x0202)
> > +#define IMX471_EXPOSURE_MIN 1
> > +#define IMX471_EXPOSURE_STEP 1
> > +#define IMX471_EXPOSURE_DEFAULT 0x04f6
> > +
> > +/*
> > + * the digital control register for all color control looks like:
> > + * +-§----------------+------------------+
> > + * | [7:0] | [15:8] |
> > + * +-----------------+------------------+
> > + * | 0x020f | 0x020e |
> > + * --------------------------------------
> > + * it is used to calculate the digital gain times value(integral + fractional)
> > + * the [15:8] bits is the fractional part and [7:0] bits is the integral
> > + * calculation equation is:
> > + * gain value (unit: times) = REG[15:8] + REG[7:0]/0x100
> > + * Only value in 0x0100 ~ 0x0FFF range is allowed.
> > + * Analog gain use 10 bits in the registers and allowed range is 0 ~ 960
> > + */
> > +/* Analog gain control */
> > +#define IMX471_REG_ANALOG_GAIN CCI_REG16(0x0204)
> > +#define IMX471_ANA_GAIN_MIN 0
> > +#define IMX471_ANA_GAIN_MAX 960
> > +#define IMX471_ANA_GAIN_STEP 1
> > +#define IMX471_ANA_GAIN_DEFAULT 0
> > +
> > +/* Digital gain control */
> > +#define IMX471_REG_DPGA_USE_GLOBAL_GAIN CCI_REG16(0x3ff9)
> > +#define IMX471_REG_DIG_GAIN_GLOBAL CCI_REG16(0x020e)
> > +#define IMX471_DGTL_GAIN_MIN 256
> > +#define IMX471_DGTL_GAIN_MAX 4095
> > +#define IMX471_DGTL_GAIN_STEP 1
> > +#define IMX471_DGTL_GAIN_DEFAULT 256
> > +
> > +#define IMX471_VALUE_08BIT 1
> > +
> > +/* HFLIP and VFLIP control */
> > +#define IMX471_REG_ORIENTATION CCI_REG8(0x0101)
> > +#define IMX471_HFLIP_BIT BIT(0)
> > +#define IMX471_VFLIP_BIT BIT(1)
> > +
> > +/* Default exposure margin */
> > +#define IMX471_EXPOSURE_MARGIN 18
> > +
> > +/* Horizontal crop window offset */
> > +#define IMX471_REG_H_WIN_OFFSET CCI_REG8(0x0409)
> > +
> > +/* Vertical crop window offset */
> > +#define IMX471_REG_V_WIN_OFFSET CCI_REG8(0x034b)
> > +
> > +/* Test Pattern Control */
> > +#define IMX471_REG_TEST_PATTERN CCI_REG8(0x0600)
> > +#define IMX471_TEST_PATTERN_DISABLED 0
> > +#define IMX471_TEST_PATTERN_SOLID_COLOR 1
> > +#define IMX471_TEST_PATTERN_COLOR_BARS 2
> > +#define IMX471_TEST_PATTERN_GRAY_COLOR_BARS 3
> > +#define IMX471_TEST_PATTERN_PN9 4
> > +
> > +/* default link frequency and external clock */
> > +#define IMX471_LINK_FREQ_DEFAULT 200000000LL
> > +#define IMX471_EXT_CLK 19200000
> > +#define IMX471_LINK_FREQ_INDEX 0
> > +
> > +#define IMX471_NUM_SUPPLIES 1
>
> There are more regulators, aren't there? Either use
> ARRAY_SIZE(imx471_supply_name) or switch to use the non-bulk API.
I only found 1 "avdd" regulator on my X9, so switch to the non-builk API.
>
> > +
> > +#define to_imx471_data(_sd) container_of_const(_sd, \
> > + struct imx471_data, sd)
>
> Fits on a single line.
Ok
>
> > +
> > +static const char * const imx471_supply_name[] = {
> > + "avdd",
> > +};
> > +
> > +/* Mode : resolution and related config&values */
> > +struct imx471_mode {
> > + /* Frame width */
> > + u32 width;
> > + /* Frame height */
> > + u32 height;
> > +
> > + /* V-timing */
> > + u32 fll_def;
> > + u32 fll_min;
> > +
> > + /* H-timing */
> > + u32 llp;
> > +
> > + /* index of link frequency */
> > + u32 link_freq_index;
> > +
> > + /* Default register values */
> > + const struct cci_reg_sequence *default_mode_regs;
> > + const int default_mode_regs_length;
> > +};
> > +
> > +struct imx471_data {
> > + struct v4l2_subdev sd;
> > + struct media_pad pad;
> > +
> > + struct v4l2_ctrl_handler ctrl_handler;
> > + /* V4L2 Controls */
> > + struct v4l2_ctrl *link_freq;
> > + struct v4l2_ctrl *pixel_rate;
> > + struct v4l2_ctrl *vblank;
> > + struct v4l2_ctrl *hblank;
> > + struct v4l2_ctrl *vflip;
> > + struct v4l2_ctrl *hflip;
> > + struct v4l2_ctrl *exposure;
> > +
> > + struct gpio_desc *reset_gpio;
> > + struct regulator_bulk_data supplies[IMX471_NUM_SUPPLIES];
> > + struct clk *img_clk;
> > +
> > + struct device *dev;
> > + struct regmap *regmap;
> > +
> > + int streaming;
> > +
> > + /* True if the device has been identified */
> > + bool identified;
> > +};
> > +
> > +static const struct cci_reg_sequence imx471_global_regs[] = {
> > + { CCI_REG8(0x0136), 0x13 },
> > + { CCI_REG8(0x0137), 0x33 },
> > + { CCI_REG8(0x3c7e), 0x08 },
> > + { CCI_REG8(0x3c7f), 0x05 },
> > + { CCI_REG8(0x3e35), 0x00 },
> > + { CCI_REG8(0x3e36), 0x00 },
> > + { CCI_REG8(0x3e37), 0x00 },
> > + { CCI_REG8(0x3f7f), 0x01 },
>
> A lot of these appear to be 16-bit registers. It'd make sense to write them
> to the sensor as such.
>
> Quite a few of these registers also have a name, please use the names
> instead of numerical values.
Ok.
>
> The sensor is probably CCS compliant to some (unknown?) degree.
It's pretty similar to imx214. I'll try my best to find the names of
the registers.
>
> > + { CCI_REG8(0x4431), 0x04 },
> > + { CCI_REG8(0x531c), 0x01 },
> > + { CCI_REG8(0x531d), 0x02 },
> > + { CCI_REG8(0x531e), 0x04 },
> > + { CCI_REG8(0x5928), 0x00 },
> > + { CCI_REG8(0x5929), 0x2f },
> > + { CCI_REG8(0x592a), 0x00 },
> > + { CCI_REG8(0x592b), 0x85 },
> > + { CCI_REG8(0x592c), 0x00 },
> > + { CCI_REG8(0x592d), 0x32 },
> > + { CCI_REG8(0x592e), 0x00 },
> > + { CCI_REG8(0x592f), 0x88 },
> > + { CCI_REG8(0x5930), 0x00 },
> > + { CCI_REG8(0x5931), 0x3d },
> > + { CCI_REG8(0x5932), 0x00 },
> > + { CCI_REG8(0x5933), 0x93 },
> > + { CCI_REG8(0x5938), 0x00 },
> > + { CCI_REG8(0x5939), 0x24 },
> > + { CCI_REG8(0x593a), 0x00 },
> > + { CCI_REG8(0x593b), 0x7a },
> > + { CCI_REG8(0x593c), 0x00 },
> > + { CCI_REG8(0x593d), 0x24 },
> > + { CCI_REG8(0x593e), 0x00 },
> > + { CCI_REG8(0x593f), 0x7a },
> > + { CCI_REG8(0x5940), 0x00 },
> > + { CCI_REG8(0x5941), 0x2f },
> > + { CCI_REG8(0x5942), 0x00 },
> > + { CCI_REG8(0x5943), 0x85 },
> > + { CCI_REG8(0x5f0e), 0x6e },
> > + { CCI_REG8(0x5f11), 0xc6 },
> > + { CCI_REG8(0x5f17), 0x5e },
> > + { CCI_REG8(0x7990), 0x01 },
> > + { CCI_REG8(0x7993), 0x5d },
> > + { CCI_REG8(0x7994), 0x5d },
> > + { CCI_REG8(0x7995), 0xa1 },
> > + { CCI_REG8(0x799a), 0x01 },
> > + { CCI_REG8(0x799d), 0x00 },
> > + { CCI_REG8(0x8169), 0x01 },
> > + { CCI_REG8(0x8359), 0x01 },
> > + { CCI_REG8(0x9302), 0x1e },
> > + { CCI_REG8(0x9306), 0x1f },
> > + { CCI_REG8(0x930a), 0x26 },
> > + { CCI_REG8(0x930e), 0x23 },
> > + { CCI_REG8(0x9312), 0x23 },
> > + { CCI_REG8(0x9316), 0x2c },
> > + { CCI_REG8(0x9317), 0x19 },
> > + { CCI_REG8(0xb046), 0x01 },
> > + { CCI_REG8(0xb048), 0x01 },
> > +};
> > +
> > +static const struct cci_reg_sequence mode_1928x1088_regs[] = {
> > + { CCI_REG8(0x0101), 0x00 },
> > + { CCI_REG8(0x0112), 0x0a },
> > + { CCI_REG8(0x0113), 0x0a },
> > + { CCI_REG8(0x0114), 0x03 },
> > + { CCI_REG8(0x0342), 0x0a },
> > + { CCI_REG8(0x0343), 0x00 },
> > + { CCI_REG8(0x0340), 0x13 },
> > + { CCI_REG8(0x0341), 0xb0 },
> > + { CCI_REG8(0x0344), 0x00 },
> > + { CCI_REG8(0x0345), 0x00 },
> > + { CCI_REG8(0x0346), 0x01 },
> > + { CCI_REG8(0x0347), 0xbc },
> > + { CCI_REG8(0x0348), 0x12 },
> > + { CCI_REG8(0x0349), 0x2f },
> > + { CCI_REG8(0x034a), 0x0b },
> > + { CCI_REG8(0x034b), 0xeb },
> > + { CCI_REG8(0x0381), 0x01 },
> > + { CCI_REG8(0x0383), 0x01 },
> > + { CCI_REG8(0x0385), 0x01 },
> > + { CCI_REG8(0x0387), 0x01 },
> > + { CCI_REG8(0x0900), 0x01 },
> > + { CCI_REG8(0x0901), 0x22 },
> > + { CCI_REG8(0x0902), 0x08 },
> > + { CCI_REG8(0x3f4c), 0x81 },
> > + { CCI_REG8(0x3f4d), 0x81 },
> > + { CCI_REG8(0x0408), 0x00 },
> > + { CCI_REG8(0x0409), 0xc8 },
> > + { CCI_REG8(0x040a), 0x00 },
> > + { CCI_REG8(0x040b), 0x6c },
> > + { CCI_REG8(0x040c), 0x07 },
> > + { CCI_REG8(0x040d), 0x88 },
> > + { CCI_REG8(0x040e), 0x04 },
> > + { CCI_REG8(0x040f), 0x40 },
> > + { CCI_REG8(0x034c), 0x07 },
> > + { CCI_REG8(0x034d), 0x88 },
> > + { CCI_REG8(0x034e), 0x04 },
> > + { CCI_REG8(0x034f), 0x40 },
> > + { CCI_REG8(0x0301), 0x06 },
> > + { CCI_REG8(0x0303), 0x02 },
> > + { CCI_REG8(0x0305), 0x02 },
> > + { CCI_REG8(0x0306), 0x00 },
> > + { CCI_REG8(0x0307), 0x79 },
> > + { CCI_REG8(0x030b), 0x01 },
> > + { CCI_REG8(0x030d), 0x02 },
> > + { CCI_REG8(0x030e), 0x00 },
> > + { CCI_REG8(0x030f), 0x53 },
> > + { CCI_REG8(0x0310), 0x01 },
> > + { CCI_REG8(0x0202), 0x13 },
> > + { CCI_REG8(0x0203), 0x9e },
> > + { CCI_REG8(0x0204), 0x00 },
> > + { CCI_REG8(0x0205), 0x00 },
> > + { CCI_REG8(0x020e), 0x01 },
> > + { CCI_REG8(0x020f), 0x00 },
> > + { CCI_REG8(0x3f78), 0x01 },
> > + { CCI_REG8(0x3f79), 0x31 },
> > + { CCI_REG8(0x3ffe), 0x00 },
> > + { CCI_REG8(0x3fff), 0x8a },
> > + { CCI_REG8(0x5f0a), 0xb6 },
> > +};
> > +
> > +static const char * const imx471_test_pattern_menu[] = {
> > + "Disabled",
> > + "Solid Colour",
> > + "Eight Vertical Colour Bars",
> > + "Colour Bars With Fade to Grey",
> > + "Pseudorandom Sequence (PN9)",
> > +};
> > +
> > +/*
> > + * When adding more than the one below, make sure the disallowed ones will
> > + * actually be disabled in the LINK_FREQ control.
> > + */
> > +static const s64 link_freq_menu_items[] = {
> > + IMX471_LINK_FREQ_DEFAULT,
> > +};
> > +
> > +/*
> > + * The Bayer formats for the flipping.
> > + * - no flip
> > + * - h flip
> > + * - v flip
> > + * - h and v flips
> > + */
> > +static const u32 imx471_mbus_formats[] = {
> > + MEDIA_BUS_FMT_SRGGB10_1X10,
> > + MEDIA_BUS_FMT_SGRBG10_1X10,
> > + MEDIA_BUS_FMT_SGBRG10_1X10,
> > + MEDIA_BUS_FMT_SBGGR10_1X10,
> > +};
> > +
> > +/* Mode configs */
> > +static const struct imx471_mode imx471_modes[] = {
> > + {
> > + .width = 1928,
> > + .height = 1088,
> > + .fll_def = 1308,
> > + .fll_min = 1308,
> > + .llp = 2328,
> > + .link_freq_index = IMX471_LINK_FREQ_INDEX,
> > + .default_mode_regs = mode_1928x1088_regs,
> > + .default_mode_regs_length = ARRAY_SIZE(mode_1928x1088_regs),
> > + },
> > +};
> > +
> > +static int imx471_get_regulators(struct device *dev, struct imx471_data *sensor)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < IMX471_NUM_SUPPLIES; i++)
>
> You could declare i here.
Something like that?
for (unsigned int i = 0; i < IMX471_NUM_SUPPLIES; i++)
>
> > + sensor->supplies[i].supply = imx471_supply_name[i];
> > +
> > + return devm_regulator_bulk_get(dev, IMX471_NUM_SUPPLIES,
> > + sensor->supplies);
> > +}
> > +
> > +static int imx471_set_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct imx471_data *sensor = container_of(ctrl->handler,
> > + struct imx471_data,
> > + ctrl_handler);
> > + struct v4l2_subdev_state *state =
> > + v4l2_subdev_get_locked_active_state(&sensor->sd);
> > + const struct v4l2_mbus_framefmt *format =
> > + v4l2_subdev_state_get_format(state, 0);
> > + s64 exposure_max;
> > + int ret;
> > +
> > + /* Propagate change of current control to all related controls */
> > + if (ctrl->id == V4L2_CID_VBLANK) {
> > + /* Update max exposure while meeting expected vblanking */
> > + exposure_max =
> > + format->height + ctrl->val - IMX471_EXPOSURE_MARGIN;
> > + __v4l2_ctrl_modify_range(sensor->exposure,
> > + sensor->exposure->minimum,
> > + exposure_max,
> > + sensor->exposure->step,
> > + exposure_max);
> > + }
> > +
> > + /* V4L2 controls values will be applied only when power is already up */
> > + if (!pm_runtime_get_if_in_use(sensor->dev))
> > + return 0;
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_ANALOGUE_GAIN:
> > + cci_write(sensor->regmap, IMX471_REG_ANALOG_GAIN,
> > + ctrl->val, &ret);
> > + break;
> > + case V4L2_CID_DIGITAL_GAIN:
> > + cci_write(sensor->regmap, IMX471_REG_DIG_GAIN_GLOBAL,
> > + ctrl->val, &ret);
> > + break;
> > + case V4L2_CID_EXPOSURE:
> > + cci_write(sensor->regmap, IMX471_REG_EXPOSURE,
> > + ctrl->val, &ret);
>
> Fits on previous line.
okay
>
> > + break;
> > + case V4L2_CID_VBLANK:
> > + /* Update FLL that meets expected vertical blanking */
> > + cci_write(sensor->regmap, IMX471_REG_FLL,
> > + format->height + ctrl->val, &ret);
> > + break;
> > + case V4L2_CID_TEST_PATTERN:
> > + cci_write(sensor->regmap, IMX471_REG_TEST_PATTERN,
> > + ctrl->val, &ret);
> > + break;
> > + case V4L2_CID_HFLIP:
> > + case V4L2_CID_VFLIP:
> > + if (sensor->streaming)
>
> Please grab the controls when starting streaming and ungrab them when
> stopping it.
v4l2_ctrl_grab() will be used to manage it when starting or stopping
the stream.
>
> > + return -EBUSY;
> > +
> > + cci_write(sensor->regmap, IMX471_REG_ORIENTATION,
> > + sensor->hflip->val | sensor->vflip->val << 1, &ret);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + dev_info(sensor->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
> > + ctrl->id, ctrl->val);
> > + break;
> > + }
> > +
> > + pm_runtime_put(sensor->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops imx471_ctrl_ops = {
> > + .s_ctrl = imx471_set_ctrl,
> > +};
> > +
> > +static u32 imx471_get_format_code(struct imx471_data *seonsor)
>
> Hmm.
>
> > +{
> > + unsigned int i;
> > +
> > + i = (seonsor->vflip->val ? 2 : 0) | (seonsor->hflip->val ? 1 : 0);
> > +
> > + return imx471_mbus_formats[i];
> > +}
> > +
> > +static int imx471_enum_mbus_code(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > +
> > + if (code->index >= (ARRAY_SIZE(imx471_mbus_formats) / 4))
> > + return -EINVAL;
> > +
> > + code->code = imx471_get_format_code(sensor);
> > +
> > + return 0;
> > +}
> > +static int imx471_enum_frame_size(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > + if (fse->index >= ARRAY_SIZE(imx471_modes))
> > + return -EINVAL;
> > +
> > + fse->min_width = imx471_modes[fse->index].width;
> > + fse->max_width = fse->min_width;
> > + fse->min_height = imx471_modes[fse->index].height;
> > + fse->max_height = fse->min_height;
> > +
> > + return 0;
> > +}
> > +
> > +static void imx471_update_pad_format(struct imx471_data *sensor,
> > + const struct imx471_mode *mode,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + fmt->format.code = imx471_get_format_code(sensor);
> > + fmt->format.width = mode->width;
> > + fmt->format.height = mode->height;
> > + fmt->format.field = V4L2_FIELD_NONE;
> > +}
> > +
> > +static int imx471_set_pad_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > + const struct imx471_mode *mode;
> > +
> > + mode = v4l2_find_nearest_size(imx471_modes,
> > + ARRAY_SIZE(imx471_modes),
> > + width, height,
> > + fmt->format.width, fmt->format.height);
> > +
> > + imx471_update_pad_format(sensor, mode, fmt);
> > +
> > + *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
> > +
> > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> > + return 0;
> > +
> > + if (media_entity_is_streaming(&sensor->sd.entity))
> > + return -EBUSY;
> > +
> > + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
>
> You can omit this check.
Ok, since it is always an active state.
>
> > + int h_blank;
> > + u64 pixel_rate;
> > +
> > + pixel_rate = IMX471_LINK_FREQ_DEFAULT * 2 * 4;
> > + do_div(pixel_rate, 10);
>
> You could use div_u64() here.
Okay
>
> > + __v4l2_ctrl_modify_range(sensor->pixel_rate,
> > + V4L2_CID_PIXEL_RATE,
> > + pixel_rate, 1, pixel_rate);
> > +
> > + __v4l2_ctrl_modify_range(sensor->vblank,
> > + mode->fll_min - mode->height,
> > + IMX471_FLL_MAX - mode->height,
> > + 1,
> > + mode->fll_def - mode->height);
> > +
> > + h_blank = mode->llp - mode->width;
> > + /*
> > + * Currently hblank is not changeable.
> > + * So FPS control is done only by vblank.
> > + */
> > + __v4l2_ctrl_modify_range(sensor->hblank, h_blank,
> > + h_blank, 1, h_blank);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx471_init_state(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state)
> > +{
> > + struct v4l2_subdev_format fmt = { };
> > +
> > + fmt.which =
> > + sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
>
> sd_state is always non-NULL here.
I'll change to fmt.which=V4L2_SUBDEV_FORMAT_ACTIVE; here.
>
> > + fmt.format.code = MEDIA_BUS_FMT_SRGGB10_1X10;
> > + fmt.format.width = imx471_modes[0].width;
> > + fmt.format.height = imx471_modes[0].height;
>
> You can assign these in declaraion.
sure
>
> > +
> > + imx471_set_pad_format(sd, sd_state, &fmt);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx471_identify_module(struct imx471_data *sensor)
> > +{
> > + int ret;
> > + u64 val;
> > +
> > + if (sensor->identified)
> > + return 0;
> > +
> > + ret = cci_read(sensor->regmap, IMX471_REG_CHIP_ID, &val, NULL);
> > + if (ret)
> > + return dev_err_probe(sensor->dev, ret,
> > + "failed to read chip id\n");
> > +
> > + if (val != IMX471_CHIP_ID)
> > + return dev_err_probe(sensor->dev, -EIO,
> > + "chip id mismatch: %x!=%llx\n",
> > + IMX471_CHIP_ID, val);
> > +
> > + sensor->identified = true;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx471_power_off(struct device *dev)
> > +{
> > + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > +
> > + clk_disable_unprepare(sensor->img_clk);
> > + gpiod_set_value_cansleep(sensor->reset_gpio, 1);
> > +
> > + regulator_bulk_disable(IMX471_NUM_SUPPLIES, sensor->supplies);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx471_power_on(struct device *dev)
> > +{
> > + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > + int ret;
> > +
> > + ret = regulator_bulk_enable(IMX471_NUM_SUPPLIES, sensor->supplies);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to enable regulators: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(sensor->img_clk);
> > + if (ret < 0) {
> > + regulator_bulk_disable(IMX471_NUM_SUPPLIES, sensor->supplies);
> > + dev_err(dev, "failed to enable imaging clock: %d", ret);
> > + return ret;
> > + }
> > +
> > + gpiod_set_value_cansleep(sensor->reset_gpio, 0);
> > +
> > + usleep_range(10000, 15000);
> > +
> > + return 0;
> > +}
> > +
> > +/* Start streaming */
> > +static int imx471_enable_stream(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *state,
> > + u32 pad, u64 streams_mask)
> > +{
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > + const struct imx471_mode *mode;
> > + struct v4l2_mbus_framefmt *fmt;
> > + int ret;
> > +
> > + ret = pm_runtime_resume_and_get(sensor->dev);
> > + if (ret)
> > + goto error_powerdown;
>
> return ret;
>
> > +
> > + ret = imx471_identify_module(sensor);
> > + if (ret)
> > + return ret;
> goto error_powerdown;
> > +
> > + /* Global Setting */
> > + cci_multi_reg_write(sensor->regmap, imx471_global_regs,
> > + ARRAY_SIZE(imx471_global_regs), &ret);
> > + if (ret) {
> > + dev_err(sensor->dev, "failed to set global settings");
> > + goto error_powerdown;
> > + }
> > +
> > + state = v4l2_subdev_get_locked_active_state(&sensor->sd);
> > + fmt = v4l2_subdev_state_get_format(state, 0);
> > + mode = v4l2_find_nearest_size(imx471_modes, ARRAY_SIZE(imx471_modes),
> > + width, height, fmt->width, fmt->height);
> > +
> > + /* Apply default values of current mode */
> > + cci_multi_reg_write(sensor->regmap, mode->default_mode_regs,
> > + mode->default_mode_regs_length, &ret);
> > + if (ret) {
> > + dev_err(sensor->dev, "failed to set mode");
> > + goto error_powerdown;
> > + }
> > +
> > + /* set digital gain control to all color mode */
> > + cci_write(sensor->regmap, IMX471_REG_DPGA_USE_GLOBAL_GAIN, 1, &ret);
> > + if (ret)
> > + goto error_powerdown;
> > +
> > + /* Apply customized values from user */
> > + ret = __v4l2_ctrl_handler_setup(&sensor->ctrl_handler);
> > + if (ret)
> > + goto error_powerdown;
> > +
> > + cci_write(sensor->regmap, IMX471_REG_MODE_SELECT,
> > + IMX471_MODE_STREAMING, &ret);
> > + if (ret)
> > + goto error_powerdown;
> > +
> > + sensor->streaming = 1;
> > +
> > + return ret;
> > +
> > +error_powerdown:
> > + pm_runtime_put(sensor->dev);
> > +
> > + return ret;
> > +}
> > +
> > +/* Stop streaming */
> > +static int imx471_disable_stream(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *state,
> > + u32 pad, u64 streams_mask)
> > +{
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > + int ret;
> > +
> > + cci_write(sensor->regmap, IMX471_REG_MODE_SELECT,
> > + IMX471_MODE_STANDBY, &ret);
> > + pm_runtime_put(sensor->dev);
> > + sensor->streaming = 0;
> > +
> > + if (ret)
> > + dev_err(sensor->dev,
> > + "failed to disable stream with return value: %d\n",
> > + ret);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops imx471_subdev_core_ops = {
> > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> > +};
> > +
> > +static const struct v4l2_subdev_video_ops imx471_video_ops = {
> > + .s_stream = v4l2_subdev_s_stream_helper,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops imx471_pad_ops = {
> > + .enum_mbus_code = imx471_enum_mbus_code,
> > + .get_fmt = v4l2_subdev_get_fmt,
> > + .set_fmt = imx471_set_pad_format,
>
> I understand get_selection is needed to make libcamera
> <URL:https://libcamera.org/sensor_driver_requirements.html> happy.
I'll make one.
>
> > + .enum_frame_size = imx471_enum_frame_size,
> > + .enable_streams = imx471_enable_stream,
> > + .disable_streams = imx471_disable_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_ops imx471_subdev_ops = {
> > + .core = &imx471_subdev_core_ops,
> > + .video = &imx471_video_ops,
> > + .pad = &imx471_pad_ops,
> > +};
> > +
> > +static const struct v4l2_subdev_internal_ops imx471_internal_ops = {
> > + .init_state = imx471_init_state,
> > +};
> > +
> > +/* Initialize control handlers */
> > +static int imx471_init_controls(struct imx471_data *sensor)
> > +{
> > + const struct imx471_mode *mode = &imx471_modes[0];
> > + struct v4l2_ctrl_handler *ctrl_hdlr;
> > + struct v4l2_fwnode_device_properties props;
> > + s64 exposure_max;
> > + s64 hblank;
>
> You could define the two on a single line.
>
> > + u64 pixel_rate;
> > + int ret;
> > +
>
> Extra newlien.
Ops.
>
> > +
> > + ctrl_hdlr = &sensor->ctrl_handler;
> > + ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_fwnode_device_parse(sensor->dev, &props);
> > + if (ret) {
> > + dev_err(sensor->dev, "failed to parse fwnode: %d", ret);
> > + return ret;
> > + }
> > +
> > + v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx471_ctrl_ops, &props);
> > + if (ctrl_hdlr->error)
> > + return ctrl_hdlr->error;
>
> This check can be omitted.
I'll drop them.
>
> > +
> > + sensor->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
>
> Indentation.
Okay
>
> > + &imx471_ctrl_ops,
> > + V4L2_CID_LINK_FREQ,
> > + ARRAY_SIZE(link_freq_menu_items) - 1,
> > + 0,
> > + link_freq_menu_items);
> > + if (sensor->link_freq)
> > + sensor->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > + /* pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
> > + pixel_rate = IMX471_LINK_FREQ_DEFAULT * 2 * 4;
> > + do_div(pixel_rate, 10);
> > + /* By default, PIXEL_RATE is read only */
> > + sensor->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_PIXEL_RATE, pixel_rate,
> > + pixel_rate, 1, pixel_rate);
> > +
> > + /* Initial vblank/hblank/exposure parameters based on current mode */
> > + sensor->vblank = v4l2_ctrl_new_std(ctrl_hdlr,
> > + &imx471_ctrl_ops,
> > + V4L2_CID_VBLANK,
> > + mode->fll_min - mode->height,
> > + IMX471_FLL_MAX - mode->height,
> > + 1,
> > + mode->fll_def - mode->height);
> > +
> > + hblank = mode->llp - mode->width;
> > + sensor->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_HBLANK, hblank, hblank,
> > + 1, hblank);
> > + if (sensor->hblank)
> > + sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > + /* fll >= exposure time + adjust parameter (default value is 18) */
> > + exposure_max = mode->fll_def - IMX471_EXPOSURE_MARGIN;
> > + sensor->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_EXPOSURE,
> > + IMX471_EXPOSURE_MIN, exposure_max,
> > + IMX471_EXPOSURE_STEP,
> > + IMX471_EXPOSURE_DEFAULT);
> > +
> > + v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> > + IMX471_ANA_GAIN_MIN, IMX471_ANA_GAIN_MAX,
> > + IMX471_ANA_GAIN_STEP, IMX471_ANA_GAIN_DEFAULT);
> > +
> > + /* Digital gain */
> > + v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> > + IMX471_DGTL_GAIN_MIN, IMX471_DGTL_GAIN_MAX,
> > + IMX471_DGTL_GAIN_STEP, IMX471_DGTL_GAIN_DEFAULT);
> > +
> > + v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_TEST_PATTERN,
> > + ARRAY_SIZE(imx471_test_pattern_menu) - 1,
> > + 0, 0, imx471_test_pattern_menu);
> > +
> > + /* HFLIP & VFLIP */
> > + sensor->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_HFLIP, 0, 1, 1, 0);
> > +
> > + sensor->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx471_ctrl_ops,
> > + V4L2_CID_VFLIP, 0, 1, 1, 0);
> > +
> > + sensor->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
> > + sensor->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
>
> You'll first need to check the control handler's error status.
>
> Please move setting the rest of the control flags here, too.
>
> > +
> > + if (ctrl_hdlr->error) {
> > + ret = ctrl_hdlr->error;
> > + dev_err(sensor->dev, "%s control init failed: %d",
> > + __func__, ret);
> > + goto error;
> > + }
I placed them in the wrong place. the changes will be:
if (ctrl_hdlr->error) {
ret = ctrl_hdlr->error;
dev_err(sensor->dev, "%s control init failed: %d",
__func__, ret);
goto error;
}
sensor->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
sensor->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
> > +
> > + sensor->sd.ctrl_handler = ctrl_hdlr;
> > +
> > + return 0;
> > +
> > +error:
> > + v4l2_ctrl_handler_free(ctrl_hdlr);
> > +
> > + return ret;
>
> You can return ctrl_hdlr->error instead of ret here.
Got it.
>
> > +}
> > +
> > +static int imx471_check_hwcfg(struct imx471_data *sensor)
> > +{
> > + struct v4l2_fwnode_endpoint bus_cfg = {
> > + .bus_type = V4L2_MBUS_CSI2_DPHY,
> > + };
> > + struct fwnode_handle *ep, *fwnode = dev_fwnode(sensor->dev);
> > + struct clk *clk;
> > + unsigned long link_freq_bitmap;
> > + int ret;
> > +
> > + clk = devm_v4l2_sensor_clk_get(sensor->dev, NULL);
> > + if (IS_ERR(clk))
> > + return dev_err_probe(sensor->dev, ret,
> > + "can't get clock frequency\n");
> > +
> > + if (clk_get_rate(clk) != IMX471_EXT_CLK)
> > + return dev_err_probe(sensor->dev, -EINVAL,
> > + "external clock %lu is not supported\n",
> > + clk_get_rate(clk));
> > +
> > + ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
> > + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> > + fwnode_handle_put(ep);
> > + if (ret)
> > + return dev_err_probe(sensor->dev, ret,
> > + "parsing endpoint failed");
> > +
> > + ret = v4l2_link_freq_to_bitmap(sensor->dev, bus_cfg.link_frequencies,
> > + bus_cfg.nr_of_link_frequencies,
> > + link_freq_menu_items,
> > + ARRAY_SIZE(link_freq_menu_items),
> > + &link_freq_bitmap);
> > +
> > + if (ret == -ENOENT)
> > + goto error_endpoint_free;
> > +
> > + if (ret == -ENODATA)
> > + goto error_endpoint_free;
>
> These error checks are redundant.
agree.
>
> > +
> > +error_endpoint_free:
> > + v4l2_fwnode_endpoint_free(&bus_cfg);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx471_probe(struct i2c_client *client)
> > +{
> > + struct imx471_data *sensor;
> > + int ret;
> > +
> > + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
> > + if (!sensor)
> > + return dev_err_probe(&client->dev, -ENOMEM,
> > + "failed to allocate memory\n");
> > +
> > + sensor->dev = &client->dev;
> > +
> > + /* Check HW config */
> > + ret = imx471_check_hwcfg(sensor);
> > + if (ret)
> > + return dev_err_probe(sensor->dev, ret,
> > + "failed to check hwcfg: %d\n", ret);
> > +
> > + ret = imx471_get_regulators(sensor->dev, sensor);
> > + if (ret)
> > + return dev_err_probe(sensor->dev, ret,
> > + "failed to get regulators\n");
> > +
> > + sensor->reset_gpio = devm_gpiod_get_optional(sensor->dev, "reset",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(sensor->reset_gpio))
> > + return dev_err_probe(sensor->dev, PTR_ERR(sensor->reset_gpio),
> > + "failed to get reset gpio\n");
> > +
> > + sensor->img_clk = devm_clk_get_optional(sensor->dev, NULL);
> > + if (IS_ERR(sensor->img_clk))
> > + return dev_err_probe(sensor->dev, PTR_ERR(sensor->img_clk),
> > + "failed to get imaging clock\n");
> > +
> > + /* Initialize subdev */
> > + v4l2_i2c_subdev_init(&sensor->sd, client, &imx471_subdev_ops);
> > +
> > + /* Initialize regmap */
> > + sensor->regmap = devm_cci_regmap_init_i2c(client, 16);
> > + if (IS_ERR(sensor->regmap))
> > + return PTR_ERR(sensor->regmap);
> > +
> > + ret = imx471_power_on(sensor->dev);
> > + if (ret)
> > + return dev_err_probe(sensor->dev, ret,
> > + "failed to power on\n");
> > +
> > + /* Check module identity */
> > + ret = imx471_identify_module(sensor);
>
> As you're identifying the rensor here unconditionally, you can drop the
> identified field in struct imx471_data. I might call it just "imx471"
> actually.
I'll change the struct name to imx471 and drop the identified field.
>
> > + if (ret) {
> > + dev_err(&client->dev, "failed to find sensor: %d", ret);
> > + goto error_power_off;
> > + }
> > +
> > + ret = imx471_init_controls(sensor);
> > + if (ret) {
> > + dev_err(sensor->dev, "failed to init controls: %d", ret);
> > + goto error_power_off;
> > + }
> > +
> > + /* Initialize subdev */
> > + sensor->sd.internal_ops = &imx471_internal_ops;
> > + sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > + V4L2_SUBDEV_FL_HAS_EVENTS;
> > + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +
> > + /* Initialize source pad */
> > + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> > + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
> > + if (ret) {
> > + dev_err(&client->dev, "failed to init entity pads: %d", ret);
> > + goto error_v4l2_ctrl_handler_free;
> > + }
> > +
> > + sensor->sd.state_lock = sensor->ctrl_handler.lock;
> > + ret = v4l2_subdev_init_finalize(&sensor->sd);
> > + if (ret < 0) {
> > + dev_err(&client->dev, "failed to init subdev: %d", ret);
> > + goto error_media_entity_pm;
> > + }
> > +
> > + pm_runtime_set_active(sensor->dev);
> > + pm_runtime_enable(sensor->dev);
> > + pm_runtime_idle(sensor->dev);
> > +
> > + ret = v4l2_async_register_subdev_sensor(&sensor->sd);
> > + if (ret < 0)
> > + goto error_v4l2_subdev_cleanup;
> > +
> > + return 0;
> > +
> > +error_v4l2_subdev_cleanup:
> > + pm_runtime_disable(sensor->dev);
> > + pm_runtime_set_suspended(sensor->dev);
> > + v4l2_subdev_cleanup(&sensor->sd);
> > +
> > +error_media_entity_pm:
> > + media_entity_cleanup(&sensor->sd.entity);
> > +
> > +error_v4l2_ctrl_handler_free:
> > + v4l2_ctrl_handler_free(sensor->sd.ctrl_handler);
> > +
> > +error_power_off:
> > + imx471_power_off(sensor->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static void imx471_remove(struct i2c_client *client)
> > +{
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct imx471_data *sensor = to_imx471_data(sd);
> > +
> > + v4l2_async_unregister_subdev(sd);
> > + v4l2_subdev_cleanup(sd);
> > + media_entity_cleanup(&sd->entity);
> > + v4l2_ctrl_handler_free(sd->ctrl_handler);
> > +
> > + pm_runtime_disable(&client->dev);
> > +
> > + if (!pm_runtime_status_suspended(sensor->dev)) {
> > + imx471_power_off(sensor->dev);
> > + pm_runtime_set_suspended(sensor->dev);
> > + }
> > +}
> > +
> > +static DEFINE_RUNTIME_DEV_PM_OPS(imx471_pm_ops, imx471_power_off,
> > + imx471_power_on, NULL);
> > +
> > +static const struct acpi_device_id imx471_acpi_ids[] __maybe_unused = {
> > + { "SONY471A" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, imx471_acpi_ids);
> > +
> > +static struct i2c_driver imx471_i2c_driver = {
> > + .driver = {
> > + .name = "imx471",
> > + .acpi_match_table = ACPI_PTR(imx471_acpi_ids),
> > + .pm = pm_sleep_ptr(&imx471_pm_ops),
> > + },
> > + .probe = imx471_probe,
> > + .remove = imx471_remove,
> > +};
> > +module_i2c_driver(imx471_i2c_driver);
> > +
> > +MODULE_AUTHOR("Jimmy Su <jimmy.su@xxxxxxxxx>");
> > +MODULE_AUTHOR("Serin Yeh <serin.yeh@xxxxxxxxx>");
> > +MODULE_AUTHOR("Kate Hsuan <hpa@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Sony imx471 sensor driver");
> > +MODULE_LICENSE("GPL");
>
> --
> Kind regards,
>
> Sakari Ailus
>
I'll propose a v3 revision to include the fixes.
--
BR,
Kate