[PATCH v2 3/4] staging: rtl8723bs: Fix block comment style in ieee80211.h

[Pramod Maurya]

Move trailing '*/' to a new line in multi-line block comments, add
proper ' * ' prefix to comment continuation lines, and consolidate
the OUI_MICROSOFT multi-line comment into a single line.

Signed-off-by: Pramod Maurya <pramod.nexgen@xxxxxxxxx>
---
 drivers/staging/rtl8723bs/include/ieee80211.h | 46 +++++++++----------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index 11825ace95a9..beee37041eeb 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -402,12 +402,14 @@ enum {
 
 /* NOTE: This data is for statistical purposes; not all hardware provides this
  *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
+ *       any adverse affects.
+ */
 
 /* IEEE 802.11 requires that STA supports concurrent reception of at least
  * three fragmented frames. This define can be increased to support more
  * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
 #define IEEE80211_FRAG_CACHE_LEN 4
 
 #define SEC_KEY_1         (1<<0)
@@ -433,19 +435,17 @@ enum {
 #define BIP_AAD_SIZE  20
 
 /*
-
- 802.11 data frame from AP
-
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
+ * 802.11 data frame from AP
+ *
+ *       ,-------------------------------------------------------------------.
+ * Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+ *       |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+ *       |      | tion | (BSSID) |         |         | ence |  data   |      |
+ *       `-------------------------------------------------------------------'
+ *
+ * Total: 28-2340 bytes
+ */
 
 #define BEACON_PROBE_SSID_ID_POSITION 12
 
@@ -469,7 +469,8 @@ Total: 28-2340 bytes
 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
  * only use 8, and then use extended rates for the remaining supported
  * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
 #define MAX_RATES_LENGTH                  ((u8)12)
 #define MAX_RATES_EX_LENGTH               ((u8)16)
 #define MAX_NETWORK_COUNT                  128
@@ -499,11 +500,11 @@ Total: 28-2340 bytes
 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
 #define IW_ESSID_MAX_SIZE 32
 /*
-join_res:
--1: authentication fail
--2: association fail
-> 0: TID
-*/
+ * join_res:
+ * -1: authentication fail
+ * -2: association fail
+ * > 0: TID
+ */
 
 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
 #define DEFAULT_FTS 2346
@@ -557,8 +558,7 @@ enum {
 	ACT_PUBLIC_MAX
 };
 
-#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
-				* 00:50:F2 */
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft OUI (also used in Wi-Fi specs) */
 #define WME_OUI_TYPE 2
 #define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
 #define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
-- 
2.52.0