Re: [PATCH rtw-next v2 1/1] wifi: rtw89: usb: Support switching to USB 3 mode

[Devin Wittmayer]

On Mon, 2026-05-11 at 21:14 +0300, Bitterblue Smith wrote:
> Are you quite sure you tested this?

Yes. Full test matrix is in the v2 cover letter (PATCH 0/1) of
this series:

- DWA-X1850 A1 / B1 (RTL8852AU)
- BrosTrend AX1L / AX4L (RTL8852BU)
- BrosTrend AX8L / EDUP AXE5400 (RTL8852CU)

Six adapters, x86_64 Tiger Lake xHCI + aarch64 BCM2712 / RP1 hosts.
60 plug-cycles + 30+ throughput cells captured 2026-04-11 to
2026-05-07. USB enumeration verified at SuperSpeed (5000 Mbps) on
every patched cell.

Per-cell raw evidence for the May 2026 expanded matrix (40 iperf3
JSON files per cell, byte-counter deltas, pre/post link state,
pre/post USB enumeration speeds, per-iteration timestamps) at:

https://github.com/Lucid-Duck/rtw89-usb3-gap/tree/main/evidence/may-2026-laptop

Per-adapter summaries:

https://github.com/Lucid-Duck/rtw89-usb3-gap/tree/main/adapters

If the Tested-by trailer should be annotated with the specific chip
list, I will add that when, and if, a v3 is needed.

Devin