Re: [PATCH v3 4/7] PCI: dwc: Use common pci_host_common_link_train_delay() helper

[Hans Zhang]

On 5/11/26 15:02, Krzysztof Wilczyński wrote:
> Hello,
>
> > -	/*
> > -	 * As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link
> > -	 * speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms
> > -	 * after Link training completes before sending a Configuration Request.
> > -	 */
> > -	if (pci->max_link_speed > 2)
> > -		msleep(PCIE_RESET_CONFIG_WAIT_MS);
> > +	pci_host_common_link_train_delay(pci->max_link_speed);
>
> This comment could move to the helper you added.

Hi Krzysztof,

Will add.

Best regards,
Hans


> Thank you!
>
> 	Krzysztof