[PATCH v2 09/10] iio: light: opt3001: switch driver to managed resources

From: Joshua Crofts via B4 Relay

Date: Tue May 12 2026 - 07:00:46 EST


From: Joshua Crofts <joshua.crofts1@xxxxxxxxx>

Move the driver to use devm_* functions to automate resource
management and simplify error handling. This also allows removal
of the opt3001_remove() function.

Signed-off-by: Joshua Crofts <joshua.crofts1@xxxxxxxxx>
---
drivers/iio/light/opt3001.c | 75 +++++++++++++++++++++++----------------------
1 file changed, 39 insertions(+), 36 deletions(-)

diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 39ea60c0af2c1ec7473d49b73778cac1f9bb6086..1319e5941b66bd82e4dc2badf5ea27cacbcfd54a 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -702,6 +702,31 @@ static int opt3001_read_id(struct opt3001 *opt)
return 0;
}

+static void opt3001_power_off(void *data)
+{
+ struct opt3001 *opt = data;
+ struct i2c_client *client = opt->client;
+ struct device *dev = opt->dev;
+
+ int ret;
+ u16 reg;
+
+ ret = i2c_smbus_read_word_swapped(client, OPT3001_CONFIGURATION);
+ if (ret < 0) {
+ dev_err(dev, "failed to read register %02x\n",
+ OPT3001_CONFIGURATION);
+ return;
+ }
+
+ reg = ret;
+ opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
+
+ ret = i2c_smbus_write_word_swapped(client, OPT3001_CONFIGURATION, reg);
+ if (ret < 0)
+ dev_err(dev, "failed to write to register %02x\n",
+ OPT3001_CONFIGURATION);
+}
+
static int opt3001_configure(struct opt3001 *opt)
{
struct i2c_client *client = opt->client;
@@ -740,6 +765,11 @@ static int opt3001_configure(struct opt3001 *opt)
return dev_err_probe(dev, ret, "failed to write register %02x\n",
OPT3001_CONFIGURATION);

+ ret = devm_add_action_or_reset(dev, opt3001_power_off, opt);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to register power off function\n");
+
ret = i2c_smbus_read_word_swapped(client, OPT3001_LOW_LIMIT);
if (ret < 0)
return dev_err_probe(dev, ret, "failed to read register %02x\n",
@@ -834,7 +864,10 @@ static int opt3001_probe(struct i2c_client *client)
opt->dev = dev;
opt->chip_info = i2c_get_match_data(client);

- mutex_init(&opt->lock);
+ ret = devm_mutex_init(dev, &opt->lock);
+ if (ret)
+ return ret;
+
init_waitqueue_head(&opt->result_ready_queue);
i2c_set_clientdata(client, iio);

@@ -856,13 +889,12 @@ static int opt3001_probe(struct i2c_client *client)

/* Make use of INT pin only if valid IRQ no. is given */
if (irq > 0) {
- ret = request_threaded_irq(irq, NULL, opt3001_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "opt3001", iio);
+ ret = devm_request_threaded_irq(dev, irq, NULL, opt3001_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "opt3001", iio);
if (ret)
- return dev_err_probe(dev, ret,
- "failed to request IRQ #%d\n",
- irq);
+ return ret;
+
opt->use_irq = true;
} else {
dev_dbg(dev, "enabling interrupt-less operation\n");
@@ -876,34 +908,6 @@ static int opt3001_probe(struct i2c_client *client)
return 0;
}

-static void opt3001_remove(struct i2c_client *client)
-{
- struct iio_dev *iio = i2c_get_clientdata(client);
- struct opt3001 *opt = iio_priv(iio);
- struct device *dev = opt->dev;
- int ret;
- u16 reg;
-
- if (opt->use_irq)
- free_irq(client->irq, iio);
-
- ret = i2c_smbus_read_word_swapped(client, OPT3001_CONFIGURATION);
- if (ret < 0) {
- dev_err(dev, "failed to read register %02x\n",
- OPT3001_CONFIGURATION);
- return;
- }
-
- reg = ret;
- opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
-
- ret = i2c_smbus_write_word_swapped(client, OPT3001_CONFIGURATION, reg);
- if (ret < 0) {
- dev_err(dev, "failed to write register %02x\n",
- OPT3001_CONFIGURATION);
- }
-}
-
static const struct opt3001_chip_info opt3001_chip_information = {
.channels = &opt3001_channels,
.chan_type = IIO_LIGHT,
@@ -942,7 +946,6 @@ MODULE_DEVICE_TABLE(of, opt3001_of_match);

static struct i2c_driver opt3001_driver = {
.probe = opt3001_probe,
- .remove = opt3001_remove,
.id_table = opt3001_id,

.driver = {

--
2.47.3