[PATCH v5 4/6] scsi: add BLIST_NO_LUN_1F blacklist flag

[Phil Pemberton]

Some multi-LUN devices respond to INQUIRY on unpopulated LUNs with
PQ=0 / PDT=0x1f instead of the standard PQ=3.  The SCSI scan layer
normally adds such devices (PQ=0 means "connected"), producing
spurious "No Device" entries.

The scsi_target field pdt_1f_for_no_lun already exists to suppress
this, but was previously only set by the USB UFI driver.

Add BLIST_NO_LUN_1F so the flag can be set per-device from
scsi_devinfo, and wire it up in scsi_add_lun() to set
starget->pdt_1f_for_no_lun from the blacklist flags.  This runs
during LUN 0 processing, before the sequential LUN scan probes
higher LUNs.

Reviewed-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Phil Pemberton <philpem@xxxxxxxxxxxxx>
---
 drivers/scsi/scsi_scan.c    | 2 ++
 include/scsi/scsi_devinfo.h | 6 +++---
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ef22a4228b85..bfbbf9be05d2 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1069,6 +1069,8 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	transport_configure_device(&sdev->sdev_gendev);
 
 	sdev->sdev_bflags = *bflags;
+	if (sdev->sdev_bflags & BLIST_NO_LUN_1F)
+		sdev->sdev_target->pdt_1f_for_no_lun = 1;
 
 	if (scsi_device_is_pseudo_dev(sdev))
 		return SCSI_SCAN_LUN_PRESENT;
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index 1d79a3b536ce..6957b0705510 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -34,7 +34,8 @@
 #define BLIST_NOSTARTONADD	((__force blist_flags_t)(1ULL << 12))
 /* do not ask for VPD page size first on some broken targets */
 #define BLIST_NO_VPD_SIZE	((__force blist_flags_t)(1ULL << 13))
-#define __BLIST_UNUSED_14	((__force blist_flags_t)(1ULL << 14))
+/* PDT 0x1f with PQ 0 means no LUN present (e.g. some ATAPI multi-LUN) */
+#define BLIST_NO_LUN_1F		((__force blist_flags_t)(1ULL << 14))
 #define __BLIST_UNUSED_15	((__force blist_flags_t)(1ULL << 15))
 #define __BLIST_UNUSED_16	((__force blist_flags_t)(1ULL << 16))
 /* try REPORT_LUNS even for SCSI-2 devs (if HBA supports more than 8 LUNs) */
@@ -77,8 +78,7 @@
 #define __BLIST_HIGH_UNUSED (~(__BLIST_LAST_USED | \
 			       (__force blist_flags_t) \
 			       ((__force __u64)__BLIST_LAST_USED - 1ULL)))
-#define __BLIST_UNUSED_MASK (__BLIST_UNUSED_14 | \
-			     __BLIST_UNUSED_15 | \
+#define __BLIST_UNUSED_MASK (__BLIST_UNUSED_15 | \
 			     __BLIST_UNUSED_16 | \
 			     __BLIST_UNUSED_24 | \
 			     __BLIST_UNUSED_27 | \
-- 
2.43.0