Re: [PATCH v3 3/3] arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support

[Dmitry Baryshkov]

On Tue, May 12, 2026 at 03:26:49PM +0300, Abel Vesa wrote:
> The Eliza MTP features a single USB Type-C port. Its USB 2.0 lines are
> routed through an eUSB2 repeater provided by the PM7750BA PMIC.
> 
> Describe the port and repeater, and enable the USB controller and PHYs.
> 
> Also specify the ADSP firmware and enable the remoteproc.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/eliza-mtp.dts | 81 ++++++++++++++++++++++++++++++++++
>  1 file changed, 81 insertions(+)
> 
> +
> +		connector@0 {
> +			compatible = "usb-c-connector";
> +			reg = <0>;
> +
> +			power-role = "dual";
> +			data-role = "dual";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					pmic_glink_hs_in: endpoint {
> +						remote-endpoint = <&usb_dwc3_hs>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					pmic_glink_ss_in: endpoint {
> +						remote-endpoint = <&usb_dp_qmpphy_out>;

No redrivers?

Other than that:


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>




> +					};
> +				};
> +			};
> +		};
> +	};
> +
>  	vph_pwr: regulator-vph-pwr {
>  		compatible = "regulator-fixed";
>  

-- 
With best wishes
Dmitry