[PATCH] iio: magnetometer: ak8975: ensure device is awake for buffered capture

[Joshua Crofts via B4 Relay]

From: Joshua Crofts <joshua.crofts1@xxxxxxxxx>

Currently, the ak8975_start_read_axis() can be called while the device
is autosuspended, causing two issues:

1. I2C transfers in the aforementioned function will fail or timeout
because ak8975_runtime_suspend() disables the device regulators.
2. Since ak8975_fill_buffer() does not hold runtime references,
ak8975_runtime_suspend() can run concurrently, and since PM callbacks
do not use a locking mechanism, it may cause a race accessing the
control register via the I2C bus.

Fix this issue by adding struct iio_buffer_setup_ops that contains
preenable and postdisable functions to ensure correct that device is
powered on when running a buffered capture.

Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support")
Reported-by: Sashiko <sashiko-bot@xxxxxxxxxx>
Closes: https://sashiko.dev/#/patchset/20260511-magnetometer-fixes-post-pickup-v7-0-9d910faa28b6%40gmail.com
Signed-off-by: Joshua Crofts <joshua.crofts1@xxxxxxxxx>
---
 drivers/iio/magnetometer/ak8975.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index dbab4d0bba348be70e5c8b71678de935879bff42..0fb2fd03d11ce195a67949056c000c473a8d3e99 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -899,6 +899,28 @@ static irqreturn_t ak8975_handle_trigger(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
+static int ak8975_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct ak8975_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+
+	return pm_runtime_resume_and_get(dev);
+}
+
+static int ak8975_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct ak8975_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ak8975_buffer_setup_ops = {
+	.preenable = ak8975_buffer_preenable,
+	.postdisable = ak8975_buffer_postdisable,
+};
 static int ak8975_probe(struct i2c_client *client)
 {
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
@@ -992,7 +1014,7 @@ static int ak8975_probe(struct i2c_client *client)
 	indio_dev->name = name;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger,
-					 NULL);
+					 &ak8975_buffer_setup_ops);
 	if (ret) {
 		dev_err(&client->dev, "triggered buffer setup failed\n");
 		goto power_off;

---
base-commit: 1548c54e9adc32a719499216f63fba14b2fc07c3
change-id: 20260513-ak8975-fix-53b1b02857dd

Best regards,
-- 
Joshua Crofts <joshua.crofts1@xxxxxxxxx>