Re: [PATCH 2/2] interconnect: qcom: eliza: Add SDCC1 slave node

[Georgi Djakov]

On 5/12/26 3:18 PM, Abel Vesa wrote:
> The Eliza interconnect provider is missing the SDCC1 CNOC CFG slave
> node. Add qhs_sdc1 to the provider node table and qsm_cfg links so
> SDCC1 interconnect paths can resolve to a provider node.
>
> Bump the qsm_cfg link count to match the new entry.
>
> Fixes: a39efc80ff50 ("interconnect: qcom: Add Eliza interconnect provider driver")
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
> ---
>   drivers/interconnect/qcom/eliza.c | 11 +++++++++--
>   1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/interconnect/qcom/eliza.c b/drivers/interconnect/qcom/eliza.c
> index a4f7903f0524..6d12a1c3c034 100644
> --- a/drivers/interconnect/qcom/eliza.c
> +++ b/drivers/interconnect/qcom/eliza.c
> @@ -127,6 +127,12 @@ static struct qcom_icc_node qhs_qup2 = {
>   	.buswidth = 4,
>   };
>   
> +static struct qcom_icc_node qhs_sdc1 = {
> +	.name = "qhs_sdc1",
> +	.channels = 1,
> +	.buswidth = 4,
> +};
> +
>   static struct qcom_icc_node qhs_sdc2 = {
>   	.name = "qhs_sdc2",
>   	.channels = 1,
> @@ -383,7 +389,7 @@ static struct qcom_icc_node qsm_cfg = {
>   	.name = "qsm_cfg",
>   	.channels = 1,
>   	.buswidth = 4,
> -	.num_links = 29,
> +	.num_links = 30,
>   	.link_nodes = { &qhs_ahb2phy0, &qhs_ahb2phy1,
>   			&qhs_camera_cfg, &qhs_clk_ctl,
>   			&qhs_crypto0_cfg, &qhs_display_cfg,
> @@ -392,7 +398,7 @@ static struct qcom_icc_node qsm_cfg = {
>   			&qhs_mss_cfg, &qhs_pcie_0_cfg,
>   			&qhs_prng, &qhs_qdss_cfg,
>   			&qhs_qspi, &qhs_qup1,
> -			&qhs_qup2, &qhs_sdc2,
> +			&qhs_qup2, &qhs_sdc1, &qhs_sdc2,
>   			&qhs_tcsr, &qhs_tlmm,
>   			&qhs_ufs_mem_cfg, &qhs_usb3_0,
>   			&qhs_venus_cfg, &qhs_vsense_ctrl_cfg,

Should we also add the sdc1 to some BCM?

Thanks,
Georgi