Re: [PATCH] arm64: dts: qcom: glymur: Add psci reboot-mode edl

[Pankaj Patil]

On 5/10/2026 8:58 AM, Bjorn Andersson wrote:
> On Tue, May 05, 2026 at 07:07:27PM +0530, Pankaj Patil wrote:
>> Add PSCI SYSTEM_RESET2 reboot-modes for glymur to be invoked by the psci
> 
> "Glymur"
> 
>> reboot-mode driver.
> 
> https://docs.kernel.org/process/submitting-patches.html#describe-your-changes
> states that you should start your commit message by describing the
> "problem" your patch is addressing. This commit message fully assumes
> that the reader already knows everything about this topic and why this
> should be added.
> 
>>
>> The following modes are defined:
>> - edl: reboot into emergency download mode for image loading via
>> the Firehose protocol.
> 
> I presume that would be the Sahara protocol, but you don't need to be
> specific about how that implementation works. It's sufficient to say
> that "edl" reboots the device into "emergency download mode (EDL)".
> 
Sure,
Will update
>>
>> Support for these modes is dependent on the psci firmware
> 
> What are the implications of that?
> 

Without the firmware support, device will reboot instead of switching to edl mode

>>
>> Signed-off-by: Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 6 ++++++
>>  arch/arm64/boot/dts/qcom/glymur.dtsi     | 2 +-
>>  2 files changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
>> index 2852d257ac8c..397519e95ca1 100644
>> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
>> @@ -560,6 +560,12 @@ &pon_resin {
>>  	status = "okay";
>>  };
>>  
>> +&psci {
>> +	reboot-mode {
>> +		mode-edl = <0x80000000 0x1>;
> 
> Does the statement about "psci firmware" somehow relate to the fact that
> this is defined in the crd.dtsi?
>

Will add in the soc dtsi

>> +	};
>> +};
>> +
>>  &tlmm {
>>  	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
>>  			       <10 2>, /* OOB UART */
>> diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
>> index f23cf81ddb77..7f426efe40ab 100644
>> --- a/arch/arm64/boot/dts/qcom/glymur.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
>> @@ -382,7 +382,7 @@ pmu {
>>  		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>  	};
>>  
>> -	psci {
>> +	psci: psci {
>>  		compatible = "arm,psci-1.0";
>>  		method = "smc";
>>  
>>
>> ---
>> base-commit: 9d0d467c3572e93c5faa2e5906a8bbcd70b24efd
>> change-id: 20260407-glymur_reboot_mode-4441770e6a8a
>> prerequisite-message-id: <20260427-arm-psci-system_reset2-vendor-reboots-v21-0-dcf937775e73@xxxxxxxxxxxxxxxx>
> 
> As far as I can tell from the discussion, that's not settled yet.
> Not sure what you want me to do with this patch then...
> 
> Regards,
> Bjorn

Shivendra will be picking up this patch in next revision of psci reset series,
I should've sent as RFC

> 
>> prerequisite-patch-id: 70829f19896a982ef4ac19fa82bf571b9eb6defa
>> prerequisite-patch-id: 600337ba5717c51204c4f426acb28bd6287e56ec
>> prerequisite-patch-id: e7a6e85c94e35b71c9813c322e811a270233c854
>> prerequisite-patch-id: 7bb3e4b151f32129e8ce5d3c1015150cbd741d13
>> prerequisite-patch-id: a61561c5070b9485399a840ff48252842393f01a
>> prerequisite-patch-id: c7f5c86cf5f88c6d5dd576565bcce25ee3848b19
>> prerequisite-patch-id: e4d851cd0a6dfb96d62e4c9d3ebfa1422b9571a6
>> prerequisite-patch-id: e6ffbbec586e6c4b508bd366615e33928a910190
>> prerequisite-patch-id: 8ae267aee51f48992d2232f18dc5795b08fd8e54
>> prerequisite-patch-id: 10b585e49a96767c3324c9e3c623a4716a641fda
>> prerequisite-patch-id: 5abbfae8b6577899e0423b36b4690adf1046cac2
>> prerequisite-patch-id: edb89ac23b7a3d5ade9b9cc1e1a77ee4d1a663cf
>> prerequisite-patch-id: 555f1b64be3631d6286f2f1e140dc38c6935d646
>>
>> Best regards,
>> -- 
>> Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx>
>>