[PATCH 1/4] arm64: dts: ti: k3-am67a-beagley-ai: Add I2C2 pinctrl

[Jai Luthra]

I2C2 is used by camera sensor devices connected on the 22-pin CSI0
connector. Add the pin definition here so I2C2 may be enabled by the
camera sensor overlays.

Signed-off-by: Jai Luthra <jai.luthra@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 5255e04b9ac7..06aac02a7668 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -157,6 +157,13 @@ J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */
 		bootph-all;
 	};
 
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (P22) GPMC0_CSn2.I2C2_SCL */
+			J722S_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (P23) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
 			J722S_IOPAD(0x01c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */

-- 
2.54.0