[PATCH 3/4] riscv: dts: spacemit: enable eMMC on Milk-V Jupiter

[Aurelien Jarno]

The Milk-V Jupiter board has a connector for an eMMC module. Add an
entry for it in the device tree and alias it mmc0. As it is not
populated by default, do no mark it as non-removable.

Signed-off-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>
---
 arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 450d28e438293..b9b8ddc8e7fb0 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -17,6 +17,7 @@ aliases {
 		ethernet1 = &eth1;
 		i2c2 = &i2c2;
 		i2c8 = &i2c8;
+		mmc0 = &emmc;
 		serial0 = &uart0;
 	};
 
@@ -138,6 +139,15 @@ &cpu_7 {
 	cpu-supply = <&buck1_3v45>;
 };
 
+&emmc {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
 &eth0 {
 	phy-handle = <&rgmii0>;
 	phy-mode = "rgmii-id";
-- 
2.53.0