[PATCH v3 7/7] arm64: dts: renesas: white-hawk: Add second mini-DP output support

[Tomi Valkeinen]

From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Add support for the mini-DisplayPort connector on the White Hawk
BreakOut board.  This port is driven by a TI SN65DSI86 DSI to eDP
bridge, which in turn gets the pixel data from the second DSI channel on
the R-Car V4H SoC.  Note that this port is not present on the White Hawk
Single development board.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
[tomi.valkeinen: added status=okay for dsc]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
 .../arm64/boot/dts/renesas/r8a779g0-white-hawk.dts | 94 ++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
index 784d4e8b204c..89d60b83ac4f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
@@ -12,4 +12,98 @@
 / {
 	model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
 	compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	sn65dsi86_refclk2: clk-x16 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
+	mini-dp-con2 {
+		compatible = "dp-connector";
+		label = "CN15";
+		type = "mini";
+
+		port {
+			mini_dp_con_in2: endpoint {
+				remote-endpoint = <&sn65dsi86_out2>;
+			};
+		};
+	};
+};
+
+&dsc {
+	status = "okay";
+};
+
+&dsi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi1_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in2>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		pinctrl-0 = <&irq1_pins>;
+		pinctrl-names = "default";
+
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk2>;
+		clock-names = "refclk";
+
+		interrupts-extended = <&intc_ex 1 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in2: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out2: endpoint {
+					remote-endpoint = <&mini_dp_con_in2>;
+				};
+			};
+		};
+	};
+};
+
+&pfc {
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	irq1_pins: irq1 {
+		groups = "intc_ex_irq1_a";
+		function = "intc_ex";
+	};
 };

-- 
2.43.0