[PATCH net-next v2 2/2] net: pse-pd: pd692x0: support disabling disable ports GPIO

[Robert Marko]

From: Robert Marko <robert.marko@xxxxxxxxxx>

Microchip PSE controllers have a dedicated disable ports input that like it
name says disables PoE on all ports.

So lets support parsing that GPIO and using the GPIO flags to set it to
output high by default and enable PoE on all ports during probe.

Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
---
Changes in v2:
* Use GPIOD_OUT_LOW by default so that DTS reflects the real active state

 drivers/net/pse-pd/pd692x0.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/pse-pd/pd692x0.c b/drivers/net/pse-pd/pd692x0.c
index 4a3c852780f5..6c5c5a26bbaa 100644
--- a/drivers/net/pse-pd/pd692x0.c
+++ b/drivers/net/pse-pd/pd692x0.c
@@ -7,6 +7,7 @@
 
 #include <linux/delay.h>
 #include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -1757,6 +1758,7 @@ static int pd692x0_i2c_probe(struct i2c_client *client)
 	static const char * const regulators[] = { "vdd", "vdda" };
 	struct pd692x0_msg msg, buf = {0}, zero = {0};
 	struct device *dev = &client->dev;
+	struct gpio_desc *disable_ports;
 	struct pd692x0_msg_ver ver;
 	struct pd692x0_priv *priv;
 	struct fw_upload *fwl;
@@ -1780,6 +1782,11 @@ static int pd692x0_i2c_probe(struct i2c_client *client)
 	priv->client = client;
 	i2c_set_clientdata(client, priv);
 
+	disable_ports = devm_gpiod_get_optional(dev, "disable-ports", GPIOD_OUT_LOW);
+	if (IS_ERR(disable_ports))
+		return dev_err_probe(&client->dev, PTR_ERR(disable_ports),
+				     "Failed to get disable ports GPIO\n");
+
 	ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf));
 	if (ret != sizeof(buf)) {
 		dev_err(dev, "Failed to get device status\n");
-- 
2.54.0