[PATCH] PCI: meson: Propagate devm_add_action_or_reset() failure

[Shuvam Pandey]

meson_pcie_probe_clock() enables a clock and then registers a devres
action to disable it during teardown. If devm_add_action_or_reset()
fails, it runs the action immediately, disabling the clock.

The return value is currently ignored, so on that failure path
meson_pcie_probe_clock() returns the disabled clock and probe continues.
Return the error so the existing probe error path unwinds normally.

Fixes: 9c0ef6d34fdbf ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Shuvam Pandey <shuvampandey1@xxxxxxxxx>
---
 drivers/pci/controller/dwc/pci-meson.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 0694084f612b..8d495bcc3a41 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -204,7 +204,9 @@ static inline struct clk *meson_pcie_probe_clock(struct device *dev,
 		return ERR_PTR(ret);
 	}
 
-	devm_add_action_or_reset(dev, meson_pcie_disable_clock, clk);
+	ret = devm_add_action_or_reset(dev, meson_pcie_disable_clock, clk);
+	if (ret)
+		return ERR_PTR(ret);
 
 	return clk;
 }
-- 
2.50.0