[PATCH 2/2] hwmon:(pmbus/xdp730) Add support for efuse xdp730
From: ASHISH YADAV
Date: Tue May 19 2026 - 03:57:47 EST
From: Ashish Yadav <ashish.yadav@xxxxxxxxxxxx>
Add the pmbus driver for Infineon XDP730 Digital eFuse Controller.
Signed-off-by: Ashish Yadav <ashish.yadav@xxxxxxxxxxxx>
---
XDP730 Digital eFuse Controller provides accurate system telemetry
(V, I, P, T) and reports analog current at the IMON pin for post-processing.
The Current and Power measurement depends on the RIMON and GIMON values.
Please look into data sheet sections 4.4.2 and 4.4.4 for more details:
https://www.infineon.com/assets/row/public/documents/24/49/infineon-xdp730-001-datasheet-en.pdf
The GIMON (microA/A) depends on the 10th bit of TELEMETRY_AVG PMBUS Register.
The value of RIMON (kohm) can be provided by the user through device tree using
infineon,rimon-micro-ohms property.
---
drivers/hwmon/pmbus/Kconfig | 9 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/xdp730.c | 128 +++++++++++++++++++++++++++++++++++
3 files changed, 138 insertions(+)
create mode 100644 drivers/hwmon/pmbus/xdp730.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 8f4bff375ecb..11c26a495e31 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -720,6 +720,15 @@ config SENSORS_XDP720
This driver can also be built as a module. If so, the module will
be called xdp720.
+config SENSORS_XDP730
+ tristate "Infineon XDP730 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDP730.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdp730.
+
config SENSORS_XDPE152
tristate "Infineon XDPE152 family"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 7129b62bc00f..32061c2ed29c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_XDP710) += xdp710.o
obj-$(CONFIG_SENSORS_XDP720) += xdp720.o
+obj-$(CONFIG_SENSORS_XDP730) += xdp730.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
obj-$(CONFIG_SENSORS_XDPE1A2G7B) += xdpe1a2g7b.o
diff --git a/drivers/hwmon/pmbus/xdp730.c b/drivers/hwmon/pmbus/xdp730.c
new file mode 100644
index 000000000000..ea8968de9f26
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdp730.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon XDP730 Digital eFuse Controller
+ *
+ * Copyright (c) 2026 Infineon Technologies. All rights reserved.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/bitops.h>
+#include <linux/math64.h>
+#include "pmbus.h"
+
+/*
+ * The IMON resistor required to generate the system overcurrent protection.
+ * Arbitrary default Rimon value: 2k Ohm
+ */
+#define XDP730_DEFAULT_RIMON 2000000000 /* 2k ohm */
+#define XDP730_TELEMETRY_AVG 0xE9
+
+static struct pmbus_driver_info xdp730_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+
+ .m[PSC_VOLTAGE_IN] = 4653,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+ .m[PSC_VOLTAGE_OUT] = 4653,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = -2,
+ /*
+ * Current and Power measurement depends on the RIMON (kOhm) and
+ * GIMON(microA/A) values.
+ */
+ .m[PSC_CURRENT_OUT] = 24668,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = -4,
+ .m[PSC_POWER] = 4486,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = -1,
+ .m[PSC_TEMPERATURE] = 54,
+ .b[PSC_TEMPERATURE] = 22521,
+ .R[PSC_TEMPERATURE] = -1,
+
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int xdp730_probe(struct i2c_client *client)
+{
+ struct pmbus_driver_info *info;
+ int ret;
+ u32 rimon;
+ int gimon;
+
+ info = devm_kmemdup(&client->dev, &xdp730_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = devm_regulator_get_enable(&client->dev, "vdd-vin");
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "failed to enable vdd-vin supply\n");
+
+ ret = i2c_smbus_read_word_data(client, XDP730_TELEMETRY_AVG);
+ if (ret < 0) {
+ dev_err(&client->dev, "Can't get TELEMETRY_AVG\n");
+ return ret;
+ }
+
+ ret >>= 10; /* 10th bit of TELEMETRY_AVG REG for GIMON Value */
+ ret &= GENMASK(0, 0);
+ if (ret == 1)
+ gimon = 20000; /* output gain 20 microA/A */
+ else
+ gimon = 10000; /* output gain 10 microA/A */
+
+ if (of_property_read_u32(client->dev.of_node,
+ "infineon,rimon-micro-ohms", &rimon))
+ rimon = XDP730_DEFAULT_RIMON; /* Default if not set via DT */
+ if (rimon == 0)
+ return -EINVAL;
+
+ /* Adapt the current and power scale for each instance */
+ info->m[PSC_CURRENT_OUT] = DIV64_U64_ROUND_CLOSEST((u64)
+ info->m[PSC_CURRENT_OUT] * rimon * gimon, 1000000000000ULL);
+ info->m[PSC_POWER] = DIV64_U64_ROUND_CLOSEST((u64)
+ info->m[PSC_POWER] * rimon * gimon, 1000000000000000ULL);
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct of_device_id xdp730_of_match[] = {
+ { .compatible = "infineon,xdp730" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, xdp730_of_match);
+
+static const struct i2c_device_id xdp730_id[] = {
+ { "xdp730" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, xdp730_id);
+
+static struct i2c_driver xdp730_driver = {
+ .driver = {
+ .name = "xdp730",
+ .of_match_table = xdp730_of_match,
+ },
+ .probe = xdp730_probe,
+ .id_table = xdp730_id,
+};
+
+module_i2c_driver(xdp730_driver);
+
+MODULE_AUTHOR("Ashish Yadav <ashish.yadav@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDP730 Digital eFuse Controller");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");
--
2.39.5