[PATCH v3 15/18] arm64: dts: qcom: sm6350: Add minidump SRAM config to SCM node
From: Mukesh Ojha
Date: Fri May 22 2026 - 15:58:50 EST
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Signed-off-by: Mukesh Ojha <mukesh.ojha@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d6adf68563cb..06892ba22875 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -363,6 +363,7 @@ big_cpu_sleep_1: cpu-sleep-1-1 {
firmware {
scm: scm {
compatible = "qcom,scm-sm6350", "qcom,scm";
+ sram = <&minidump_config>;
#reset-cells = <1>;
};
};
@@ -2808,6 +2809,10 @@ sram@14680000 {
ranges = <0 0 0x14680000 0x2e000>;
+ minidump_config: minidump-sram@1c {
+ reg = <0x1c 0x4>;
+ };
+
ipa_modem_tables: modem-tables@28000 {
reg = <0x28000 0x2000>;
};
--
2.53.0