Re: [PATCH v5 3/6] LoongArch: KVM: Use existing macro about interrupt bit mask

[Huacai Chen]

On Tue, Jun 2, 2026 at 4:13 PM Bibo Mao <maobibo@xxxxxxxxxxx> wrote:
>
>
>
> On 2026/6/2 下午1:01, Huacai Chen wrote:
> > On Tue, Jun 2, 2026 at 9:39 AM Bibo Mao <maobibo@xxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 2026/6/1 下午9:50, Huacai Chen wrote:
> >>> Hi, Bibo,
> >>>
> >>> On Tue, May 26, 2026 at 8:53 PM Bibo Mao <maobibo@xxxxxxxxxxx> wrote:
> >>>>
> >>>> With interrupt post, register CSR_GINTC and CSR_ESTAT is used, and
> >>>> CSR_ESTAT is used for percpu interrupt injection and CSR_GINTC is for
> >>>> external hardware interrupt injection.
> >>>>
> >>>> Here use existing macro about interrupt bit of register CSR_GINTC and
> >>>> CSR_ESTAT, rather than hard coded constant value.
> >>>>
> >>>> Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
> >>>> ---
> >>>>    arch/loongarch/include/asm/kvm_vcpu.h | 43 ++++++++++++++++++---------
> >>>>    1 file changed, 29 insertions(+), 14 deletions(-)
> >>>>
> >>>> diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h
> >>>> index 3784ab4ccdb5..efe26b04b35f 100644
> >>>> --- a/arch/loongarch/include/asm/kvm_vcpu.h
> >>>> +++ b/arch/loongarch/include/asm/kvm_vcpu.h
> >>>> @@ -10,22 +10,37 @@
> >>>>    #include <asm/loongarch.h>
> >>>>
> >>>>    /* Controlled by 0x5 guest estat */
> >>>> -#define CPU_SIP0                       (_ULCAST_(1))
> >>>> -#define CPU_SIP1                       (_ULCAST_(1) << 1)
> >>>> -#define CPU_PMU                                (_ULCAST_(1) << 10)
> >>>> -#define CPU_TIMER                      (_ULCAST_(1) << 11)
> >>>> -#define CPU_IPI                                (_ULCAST_(1) << 12)
> >>>> -#define CPU_AVEC                        (_ULCAST_(1) << 14)
> >>>> +#define CPU_SIP0                       BIT(INT_SWI0)
> >>>> +#define CPU_SIP1                       BIT(INT_SWI1)
> >>>> +#define CPU_HWI0                       BIT(INT_HWI0)
> >>>> +#define CPU_HWI1                       BIT(INT_HWI1)
> >>>> +#define CPU_HWI2                       BIT(INT_HWI2)
> >>>> +#define CPU_HWI3                       BIT(INT_HWI3)
> >>>> +#define CPU_HWI4                       BIT(INT_HWI4)
> >>>> +#define CPU_HWI5                       BIT(INT_HWI5)
> >>>> +#define CPU_HWI6                       BIT(INT_HWI6)
> >>>> +#define CPU_HWI7                       BIT(INT_HWI7)
> >>>> +#define CPU_PMU                                BIT(INT_PCOV)
> >>>> +#define CPU_TIMER                      BIT(INT_TI)
> >>>> +#define CPU_IPI                                BIT(INT_IPI)
> >>>> +#define CPU_AVEC                       BIT(INT_AVEC)
> >>>> +#define KVM_ESTAT_IRQ_MASK             (CPU_SIP0 | CPU_SIP1 | CPU_PMU | CPU_TIMER \
> >>>> +                                               | CPU_IPI | CPU_AVEC)
> >>>> +#define KVM_ESTAT_HWI_MASK             (CPU_HWI0 | CPU_HWI1 | CPU_HWI2 | CPU_HWI3 \
> >>>> +                                               | CPU_HWI4 | CPU_HWI5 | CPU_HWI6 | CPU_HWI7)
> >>>>
> >>>>    /* Controlled by 0x52 guest exception VIP aligned to estat bit 5~12 */
> >>>> -#define CPU_IP0                                (_ULCAST_(1))
> >>>> -#define CPU_IP1                                (_ULCAST_(1) << 1)
> >>>> -#define CPU_IP2                                (_ULCAST_(1) << 2)
> >>>> -#define CPU_IP3                                (_ULCAST_(1) << 3)
> >>>> -#define CPU_IP4                                (_ULCAST_(1) << 4)
> >>>> -#define CPU_IP5                                (_ULCAST_(1) << 5)
> >>>> -#define CPU_IP6                                (_ULCAST_(1) << 6)
> >>>> -#define CPU_IP7                                (_ULCAST_(1) << 7)
> >>>> +#define GINTC_VIP_DELTA                        (INT_HWI0 - CSR_GINTC_VIP_SHIFT)
> >>> Don't use too many wrappers, just use INT_HWI0 instead of
> >>> GINTC_VIP_DELTA in this series is perfect. In other places INT_SWI0 is
> >>> also used for shifts.
> >>
> >> The above macro definition is a little complicated, I do not know how to
> >> optimize it. do you mean remove GINTC_VIP_DELTA just use 2 such as:
> >> #define CPU_IP0                       BIT(INT_HWI0 - 2)
> > CSR_GINTC_VIP_SHIFT is 0 and GINTC_VIP_DELTA is equal to INT_HWI0. I
> > mean remove the GINTC_VIP_DELTA definition and use INT_HWI0 instead.
> For macro definition such CPU_IP0, GINTC_VIP_DELTA can be removed. And
> define it as follows directly.
> #define CPU_IP0                       BIT(0)
>
> However GINTC_VIP_DELTA is still useful, because bitmap with HWI0-HWI7
> in estat register starts from INT_HWI0, however with register gintc it
> starts from CSR_GINTC_VIP_SHIFT.
>
> For example with _kvm_getcsr() API, it is to get interrupt status. Here
> is the example code.
> gintc = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_GINTC)& KVM_GINTC_IRQ_MASK;
> estat = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_ESTAT) &~KVM_ESTAT_HWI_MASK;
> *val = estat | (gintc << GINTC_VIP_DELTA);
>
> Remove GINTC_VIP_DELTA and use INT_HWI0 directly, it will be
> *val = estat | (gintc << INT_HWI0);
>
> I do not know what is the meaning about "gintc << INT_HWI0", especially
> if the value of CSR_GINTC_VIP_SHIFT is no zero.
In your Patch-2 there is "clear_csr_estat(1 << INT_SWI0)", INT_SW0 and
INT_HW0 are good friends. Why "1 << INT_SWI0" is acceptable but
"gintc << INT_HWI0" is not?

Huacai

>
> Regards
> Bibo Mao
> >
> >
> > Huacai
> >
> >>
> >> or something like this:
> >> #define CPU_IP0                       (CPU_HWI0 >> GINTC_VIP_DELTA)
> >>
> >> Regards
> >> Bibo Mao
> >>>
> >>>
> >>> Huacai
> >>>
> >>>> +#define CPU_IP0                                BIT(INT_HWI0 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP1                                BIT(INT_HWI1 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP2                                BIT(INT_HWI2 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP3                                BIT(INT_HWI3 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP4                                BIT(INT_HWI4 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP5                                BIT(INT_HWI5 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP6                                BIT(INT_HWI6 - GINTC_VIP_DELTA)
> >>>> +#define CPU_IP7                                BIT(INT_HWI7 - GINTC_VIP_DELTA)
> >>>> +#define KVM_GINTC_IRQ_MASK             (CPU_IP0 | CPU_IP1 | CPU_IP2 | CPU_IP3 \
> >>>> +                                               | CPU_IP4 | CPU_IP5 | CPU_IP6 | CPU_IP7)
> >>>>
> >>>>    #define MNSEC_PER_SEC                  (NSEC_PER_SEC >> 20)
> >>>>
> >>>> --
> >>>> 2.39.3
> >>>>
> >>>>
> >>
> >>
>
>