[PATCH 2/2] arm64: dts: qcom: sc8280xp-x13s: Use predefined MCLK pinctrl
From: Pengyu Luo
Date: Sun Jun 07 2026 - 12:06:54 EST
Now that the predefined MCLK pinctrl configuration is available in the
sc8280xp SoC DTSI, switch the ThinkPad X13s to use it. Drop the local,
duplicate MCLK pin definition from the camera pinctrl node.
Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
---
.../boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index abd9c5a67b9f..5d652be69e44 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -674,8 +674,9 @@ camera@10 {
reg = <0x10>;
reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&cam_rgb_default>, <&cam_mclk3_default>;
pinctrl-names = "default";
- pinctrl-0 = <&cam_rgb_default>;
leds = <&privacy_led>;
led-names = "privacy";
@@ -1552,13 +1553,6 @@ cam_indicator_en: cam-indicator-en-state {
};
cam_rgb_default: cam-rgb-default-state {
- mclk-pins {
- pins = "gpio17";
- function = "cam_mclk";
- drive-strength = <16>;
- bias-disable;
- };
-
sc-rgb-xshut-n-pins {
pins = "gpio15";
function = "gpio";
--
2.54.0