[PATCH] pinctrl: qcom: eliza: Add missing sdc2 pin function mappings

[Abel Vesa]

GPIOs 38, 39, 48 and 49 support the SDC2 DATA function, while
GPIO 51 supports SDC2 CMD and GPIO 62 supports SDC2 CLK.

However, the sdc2 pin function is not listed in the corresponding
pingroup definitions, preventing these pins from being muxed for
SDC2 operation.

Add the missing sdc2 function mappings.

Fixes: 6f26989e15fb ("pinctrl: qcom: Add Eliza pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-eliza.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-eliza.c b/drivers/pinctrl/qcom/pinctrl-eliza.c
index da2fead23aa1..58545e14710e 100644
--- a/drivers/pinctrl/qcom/pinctrl-eliza.c
+++ b/drivers/pinctrl/qcom/pinctrl-eliza.c
@@ -1402,8 +1402,8 @@ static const struct msm_pingroup eliza_groups[] = {
 	[35] = PINGROUP(35, qup1_se1, qup1_se5, tb_trig_sdc2, gcc_gp2, qdss_gpio_tracedata, _, _, _, _, _, _),
 	[36] = PINGROUP(36, qup1_se4_01, qup1_se4_23, ibi_i3c, _, _, _, _, _, _, _, _),
 	[37] = PINGROUP(37, qup1_se4_01, qup1_se4_23, ibi_i3c, _, _, _, _, _, _, _, _),
-	[38] = PINGROUP(38, _, _, _, _, _, _, _, _, _, _, _),
-	[39] = PINGROUP(39, _, _, _, _, _, _, _, _, _, _, _),
+	[38] = PINGROUP(38, sdc2, _, _, _, _, _, _, _, _, _, _),
+	[39] = PINGROUP(39, sdc2, _, _, _, _, _, _, _, _, _, _),
 	[40] = PINGROUP(40, qup1_se6, qup1_se2, qup1_se6_l3_mira, _, qdss_gpio_tracedata, gnss_adc1, ddr_pxi1, _, _, _, _),
 	[41] = PINGROUP(41, _, _, _, _, _, _, _, _, _, _, _),
 	[42] = PINGROUP(42, qup1_se6, qup1_se2, qup1_se6_l1_mira, qdss_gpio_tracedata, gnss_adc0, ddr_pxi1, _, _, _, _, _),
@@ -1412,10 +1412,10 @@ static const struct msm_pingroup eliza_groups[] = {
 	[45] = PINGROUP(45, qup1_se3, _, _, _, _, _, _, _, _, _, _),
 	[46] = PINGROUP(46, qup1_se3, hdmi_tx_cec, _, _, _, _, _, _, _, _, _),
 	[47] = PINGROUP(47, qup1_se3, hdmi_hot_plug, _, _, _, _, _, _, _, _, _),
-	[48] = PINGROUP(48, _, _, _, _, _, _, _, _, _, _, _),
-	[49] = PINGROUP(49, _, _, _, _, _, _, _, _, _, _, _),
+	[48] = PINGROUP(48, sdc2, _, _, _, _, _, _, _, _, _, _),
+	[49] = PINGROUP(49, sdc2, _, _, _, _, _, _, _, _, _, _),
 	[50] = PINGROUP(50, sdc2_fb_clk, _, _, _, _, _, _, _, _, _, _),
-	[51] = PINGROUP(51, _, _, _, _, _, _, _, _, _, _, _),
+	[51] = PINGROUP(51, sdc2, _, _, _, _, _, _, _, _, _, _),
 	[52] = PINGROUP(52, qup1_se2, pcie1_clk_req_n, qup1_se2_l2_mirb, ddr_bist_complete, qdss_gpio_tracedata, _, vsense_trigger_mirnat, _, _, _, _),
 	[53] = PINGROUP(53, qup1_se2, qup1_se2_l3_mirb, gcc_gp1, ddr_bist_stop, _, qdss_gpio_tracedata, _, _, _, _, _),
 	[54] = PINGROUP(54, qup1_se2_l2_mira, qup1_se6_l1_mirb, qdss_gpio_traceclk, gnss_adc1, atest_usb, ddr_pxi0, _, _, _, _, _),
@@ -1426,7 +1426,7 @@ static const struct msm_pingroup eliza_groups[] = {
 	[59] = PINGROUP(59, _, _, _, _, _, _, _, _, _, _, _),
 	[60] = PINGROUP(60, i2s0_sck, _, _, _, _, _, _, _, _, _, _),
 	[61] = PINGROUP(61, i2s0_ws, _, _, _, _, _, _, _, _, _, _),
-	[62] = PINGROUP(62, _, _, _, _, _, _, _, _, _, _, _),
+	[62] = PINGROUP(62, sdc2, _, _, _, _, _, _, _, _, _, _),
 	[63] = PINGROUP(63, resout_gpio, i2s0_data1, cci_timer, vfr_0, _, _, _, _, _, _, _),
 	[64] = PINGROUP(64, i2s0_data0, _, _, _, _, _, _, _, _, _, _),
 	[65] = PINGROUP(65, cam_mclk, _, qdss_gpio_tracedata, _, _, _, _, _, _, _, _),

---
base-commit: a87737435cfa134f9cdcc696ba3080759d04cf72
change-id: 20260609-eliza-pinctrl-fix-sdc2-gpios-0c7e1b269e85

Best regards,
--  
Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>