[PATCH v2 25/37] arm64: dts: qcom: sar2130p: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys and phy-names from the controller to
the existing pcieport0 and newly labeled pcie1_port0, allowing
board-level overrides. Move perst-gpios/wake-gpios from the &pcie0
controller override to &pcieport0 in the board file, renaming
perst-gpios to reset-gpios to match the binding used in the root
port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chaitanya.chundru@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts |  6 +++---
 arch/arm64/boot/dts/qcom/sar2130p.dtsi         | 12 +++++-------
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
index 71a09e76b359..6e0557f1c14b 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
+++ b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
@@ -357,9 +357,6 @@ &i2c10 {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -367,6 +364,9 @@ &pcie0 {
 };
 
 &pcieport0 {
+	reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index d65ad0df6865..804ccfbdb091 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -1337,9 +1337,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
 			status = "disabled";
 
 			pcieport0: pcie@0 {
@@ -1350,6 +1347,8 @@ pcieport0: pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+
+				phys = <&pcie0_phy>;
 			};
 		};
 
@@ -1464,12 +1463,9 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -1477,6 +1473,8 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+
+				phys = <&pcie1_phy>;
 			};
 		};
 

-- 
2.34.1