[PATCH v2 0/9] Input: cap11xx - Add support for CAP1114

[Jun Yan]

CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.

Patches 1-4 perform driver cleanup and DT binding tweaks.
Patches 5-6 add reset-gpios support for CAP11xx.
Patches 7-9 add support for CAP1114.

Changes in v2:
- Drop LED property tweaks, keep only reg changes and node regex
  update in DT bindings.
- Split microchip,cap1126 LED reg constraints into a separate patch.
- Replace usleep_range() with msleep() for 500 ms delay during
  reset pin handling.
- Add missing <linux/delay.h> for usleep_range() and msleep().
- Add CAP1114 to unsupported enum for microchip,signal-guard and
  microchip,calib-sensitivity
- Add constraint for linux,keycodes to support CAP1114.
- When reading CAP1114 button status, mask STATUS1 to bits 0-5
  and OR with STATUS2.
- Adjust code style.
- Link to v1:
  https://lore.kernel.org/all/20260606150458.250606-1-jerrysteve1101@xxxxxxxxx

Jun Yan (9):
  Input: cap11xx - clean up duplicate log and add probe error logs
  Input: cap11xx - remove unused register macros
  dt-bindings: input: microchip,cap11xx: Update datasheet URL and LED
    reg range
  dt-bindings: input: microchip,cap11xx: Add microchip,cap1126 LED reg
    constraints
  dt-bindings: input: microchip,cap11xx: Add reset-gpios property
  Input: cap11xx - add reset gpio support
  Input: cap11xx - refactor code for better CAP1114 support.
  dt-bindings: input: microchip,cap11xx: Add CAP1114 support
  Input: cap11xx - add support for CAP1114

 .../bindings/input/microchip,cap11xx.yaml     |  85 ++++++-
 drivers/input/keyboard/cap11xx.c              | 230 +++++++++++-------
 2 files changed, 224 insertions(+), 91 deletions(-)

-- 
2.54.0