Re: [PATCH v2 8/9] dt-bindings: input: microchip,cap11xx: Add CAP1114 support

[Jun Yan]

> On Fri, Jun 12, 2026 at 03:22:14PM +0800, Jun Yan wrote:
> > CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
> > and hardware reset support.
> >=20
> > Add the compatible string for CAP1114, add its datasheet URL,
> > update the maximum of LED channel reg, and add constraint for
> > linux,keycodes.
> >=20
> > Previously, the LED reg property had a default maximum of 7 for CAP1188.
> > With the addition of CAP1114, the default maximum is now 11.
> > An if-then constraint is added to limit the LED count for CAP1188.
> >=20
> > Update description for microchip,input-threshold: CAP1114 only provides
> > eight threshold entries, which does not match its total channel count.
> >=20
> > CAP1114 does not support microchip,signal-guard and
> > microchip,calib-sensitivity.
> >=20
> > Add CAP1114 to the unsupported enum list.
> >=20
> > Signed-off-by: Jun Yan <jerrysteve1101@xxxxxxxxx>
> > ---
> >  .../bindings/input/microchip,cap11xx.yaml     | 32 ++++++++++++++++++-
> >  1 file changed, 31 insertions(+), 1 deletion(-)
> >=20
> > diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.ya=
> ml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> > index 778ec6d659a8..0e9a1a8a3f3e 100644
> > --- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> > +++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> > @@ -12,6 +12,7 @@ description: |
> > =20
> >    For more product information please see the links below:
> >      CAP1106: https://ww1.microchip.com/downloads/en/DeviceDoc/00001624B.=
> pdf
> > +    CAP1114: https://ww1.microchip.com/downloads/en/DeviceDoc/00002444A.=
> pdf
> >      CAP1126: https://ww1.microchip.com/downloads/en/DeviceDoc/00001623B.=
> pdf
> >      CAP1188: https://ww1.microchip.com/downloads/en/DeviceDoc/00001620C.=
> pdf
> >      CAP1203: https://ww1.microchip.com/downloads/en/DeviceDoc/00001572B.=
> pdf
> > @@ -26,6 +27,7 @@ properties:
> >    compatible:
> >      enum:
> >        - microchip,cap1106
> > +      - microchip,cap1114
> >        - microchip,cap1126
> >        - microchip,cap1188
> >        - microchip,cap1203
> > @@ -122,6 +124,8 @@ properties:
> >        is required for a touch to be registered, making the touch sensor =
> less
> >        sensitive.
> >        The number of entries must correspond to the number of channels.
> > +      CAP1114 is an exception where channels 8~14 reuse the eighth entry=
> 's
> > +      threshold, so counts differ.
> > =20
> >    microchip,calib-sensitivity:
> >      $ref: /schemas/types.yaml#/definitions/uint32-array
> > @@ -149,7 +153,7 @@ patternProperties:
> >        reg:
> >          description: LED channel number
> >          minimum: 0
> > -        maximum: 7
> > +        maximum: 10
> > =20
> >        label: true
> > =20
> > @@ -178,6 +182,18 @@ allOf:
> >        properties:
> >          reset-gpios: false
> > =20
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - microchip,cap1114
> > +    then:
> > +      properties:
> > +        linux,keycodes:
> > +          minItems: 14
> > +          maxItems: 14
> 
> Sashiko complaint here is valid.
> You need to increase the outer constraint to max 14, and only set the
> min here.
> Then you need to add an else that sets maxitems to 8.

Thanks for the review. I'll fix this in v3.

> pw-bot: changes-requested
> 
> Cheers,
> Conor.