Re: [PATCH v2] dt-bindings: display: Add Solomon SSD1351 OLED controller

[Javier Martinez Canillas]

Amit Barzilai <amit.barzilai22@xxxxxxxxx> writes:

Hello Amit,

> Add a device tree binding for the Solomon SSD1351, a 128x128 65k-color
> RGB OLED display controller driven over a 4-wire SPI bus. The binding
> builds on the shared solomon,ssd-common.yaml properties already used by
> the other Solomon display controllers.
>
> Assisted-by: Claude:claude-opus-4-8
> Signed-off-by: Amit Barzilai <amit.barzilai22@xxxxxxxxx>
> ---
> Changes since v1:
> - Drop solomon,width / solomon,height: both are deducible from the
>   compatible and are already declared (as optional) by the referenced
>   solomon,ssd-common.yaml, so a local override is unnecessary.
> - Drop the rotation property: it has no consumer (rotation is being removed from the driver).
> - Use dt-bindings/gpio/gpio.h flag defines in the example
>   (reset-gpios active-low, dc-gpios active-high).
>
>  .../bindings/display/solomon,ssd1351.yaml     | 41 +++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
> new file mode 100644
> index 000000000000..39622d74a41d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/solomon,ssd1351.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Solomon SSD1351 OLED Display Controller
> +
> +maintainers:
> +  - Amit Barzilai <amit.barzilai22@xxxxxxxxx>
> +

Feel free to add me as a maintainer of this binding too since I
maintain the ssd130x driver.

It looks good to me.

Reviewed-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat