Re: [PATCH 01/12] dt-bindings: rtc: renesas,rzn1-rtc: Add RZ/T2H and RZ/N2H support

[Wolfram Sang]

On Mon, Jun 15, 2026 at 04:47:54PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Add compatible strings for the RTC block found on the Renesas RZ/T2H
> (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
> 
> These SoCs integrate a closely related variant of the RZ/N1 RTC IP.
> Unlike RZ/N1, they do not implement the RTCA0SUBU and RTCA0TCR
> registers. This is not a limitation for Linux support, as these
> registers are not used when the RTC operates in "scmp" clock mode, which
> is required on RZ/T2H and RZ/N2H due to their 195.3 kHz input clock.
> 
> The RZ/T2H RTC variant also supports a 1Hz output signal on the
> RTCAT1HZ pin, controlled by the RTCA0CTL1[RTCA01HZE] bit. This bit is
> marked as reserved in the RZ/N1 hardware manual.
> 
> Update the binding schema to require the additional clock inputs used by
> these SoCs.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Sashiko is wrong here because

a) TCR is the "Test Register"
b) TCR is not even present on RZ/N1D. Cover-letter misses that, too.

Reviewed-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature