[PATCH 2/3] dt-bindings: phy: rockchip-inno-csi-dphy: add rockchip,clk-lane-phase property

[Gerald Loacker]

Add support for the optional rockchip,clk-lane-phase device tree property
to allow board-specific tuning of the clock lane sampling phase for
improved signal integrity across supported data rates.

Signed-off-by: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
index 03950b3cad08c..0d824d1511bc0 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -56,6 +56,13 @@ properties:
     description:
       Some additional phy settings are access through GRF regs.
 
+  rockchip,clk-lane-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Clock lane sampling phase in 40 ps steps. The hardware default is 3.
+
 required:
   - compatible
   - reg

-- 
2.34.1