Re: [PATCH v2] arm64: dts: qcom: sm8650-ayaneo-pocket-s2: add display nodes

[Konrad Dybcio]

On 5/22/26 3:15 PM, Neil Armstrong wrote:
> From: KancyJoe <kancy2333@xxxxxxxxxxx>
> 
> Add nodes for the dual DSI panel, the SGM3804 regulator, the
> SY7758 backlight controller, the touch controller, and enable
> the GPU to enable full display support.
> 
> Signed-off-by: KancyJoe <kancy2333@xxxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
> Depends on follwing bindings, all reviewed:
> - https://lore.kernel.org/all/20260522-topic-sm8650-ayaneo-pocket-s2-r63419-v6-1-16edddda9951@xxxxxxxxxx/
> - https://lore.kernel.org/all/20260521-topic-sm8650-ayaneo-pocket-s2-sy7758-v4-1-73c732615e4a@xxxxxxxxxx/
> - https://lore.kernel.org/all/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-1-bd6b1c300ecc@xxxxxxxxxx/
> ---
> Changes in v2:
> - Update for bindings changes
> - Remove empty line
> - Link to v1: https://patch.msgid.link/20260428-topic-sm8650-ayaneo-pocket-s2-display-dt-v1-1-ff132c00d076@xxxxxxxxxx
> ---
>  .../boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts      | 241 +++++++++++++++++++++
>  1 file changed, 241 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts b/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts
> index 0dc994f4e48d..af890e76813b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts
> @@ -220,6 +220,22 @@ upd720201_vdd33_reg: upd720201-vdd33-regulator {
>  		pinctrl-names = "default";
>  	};
>  
> +	sy7758_vdd33_reg: sy7758-vdd33-regulator {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "sy7758_vdd33";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpios = <&tlmm 163 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		vin-supply = <&vph_pwr>;
> +
> +		pinctrl-0 = <&sy7758_vdd33>;
> +		pinctrl-names = "default";

regulator-boot-on would be my guess, probably also on the other
disp regulators


Konrad