[PATCH 1/2] ARM: dts: aspeed: sanmiguel: fix PDB HSC shunt resistor

[Mike Hsieh]

Correct the shunt-resistor-micro-ohms values for the four TI LM5066i
hot-swap controllers on the PDB. This ensures accurate current and
power sensor readings from the hardware monitors.

Signed-off-by: Mike Hsieh <mike.quanta.115@xxxxxxxxx>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
index d7ed497d7227..3faac0925a79 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
@@ -450,7 +450,7 @@ pdb_mps_hsc1: power-monitor@10 {
 	pdb_ti_hsc1: power-monitor@11 {
 		compatible = "ti,lm5066i";
 		reg = <0x11>;
-		shunt-resistor-micro-ohms = <763>;
+		shunt-resistor-micro-ohms = <1000>;
 	};
 
 	pdb_mps_hsc2: power-monitor@12 {
@@ -461,7 +461,7 @@ pdb_mps_hsc2: power-monitor@12 {
 	pdb_ti_hsc2: power-monitor@13 {
 		compatible = "ti,lm5066i";
 		reg = <0x13>;
-		shunt-resistor-micro-ohms = <294>;
+		shunt-resistor-micro-ohms = <321>;
 	};
 
 	pdb_mps_hsc3: power-monitor@14 {
@@ -472,7 +472,7 @@ pdb_mps_hsc3: power-monitor@14 {
 	pdb_ti_hsc3: power-monitor@15 {
 		compatible = "ti,lm5066i";
 		reg = <0x15>;
-		shunt-resistor-micro-ohms = <294>;
+		shunt-resistor-micro-ohms = <321>;
 	};
 
 	pdb_mps_hsc4: power-monitor@16 {
@@ -483,7 +483,7 @@ pdb_mps_hsc4: power-monitor@16 {
 	pdb_ti_hsc4: power-monitor@17 {
 		compatible = "ti,lm5066i";
 		reg = <0x17>;
-		shunt-resistor-micro-ohms = <381>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 
 	pdb_ioexp_20: gpio@20 {

-- 
2.53.0