[PATCH 0/2] media: i2c: Add OmniVision OG0VA1B camera sensor driver

[Wenmeng Liu]

Add OmniVision OG0VA1B driver support. The OmniVision OG0VA1B is a
1/10-inch monochrome CMOS VGA image sensor. It outputs 10-bit raw (Y10)
frames at up to 640x480 resolution over a single-lane MIPI CSI-2
interface and is controlled via an I2C-compatible SCCB bus.

This driver has been verified on the Purwa EVK.

Signed-off-by: Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
---
Wenmeng Liu (2):
      dt-bindings: media: i2c: Add OmniVision OG0VA1B
      media: i2c: og0va1b: Add OmniVision OG0VA1B camera sensor

 .../bindings/media/i2c/ovti,og0va1b.yaml           | 104 +++
 MAINTAINERS                                        |   7 +
 drivers/media/i2c/Kconfig                          |  10 +
 drivers/media/i2c/Makefile                         |   1 +
 drivers/media/i2c/og0va1b.c                        | 867 +++++++++++++++++++++
 5 files changed, 989 insertions(+)
---
base-commit: 4fa3f5fabb30bf00d7475d5a33459ea83d639bf9
change-id: 20260618-og0va1b-55bbf3cabb0e

Best regards,
-- 
Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>