Re: [PATCH v3 0/2] cpufreq: spacemit: Add cpufreq support for K1 SoC

[Gong Shuai]

On 6/12/2026 5:51 PM, Shuwei Wu wrote:
> This series enables CPU frequency scaling for the SpacemiT K1 SoC.
>
> K1 has two CPU cluster clocks but one shared CPU voltage rail. Add a
> small K1-specific cpufreq driver so the two clocks and the shared OPP
> transition can be handled together.
>
> Tested on Banana Pi BPI-F3. The system boots with all eight CPUs online,
> the K1 cpufreq driver registers one policy for CPUs 0-7, and both CPU
> cluster clocks follow the selected cpufreq rate.
>
> ~ # cat /sys/devices/system/cpu/online
> 0-7
>
> ~ # ls /sys/devices/system/cpu/cpufreq
> policy0
>
> ~ # cat /sys/devices/system/cpu/cpufreq/policy0/affected_cpus
> 0 1 2 3 4 5 6 7
>
> ~ # cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies
> 614400 819000 1000000 1228800 1600000
>
> With the userspace governor:
> ----------------------------------------------------------------------------
> Frequency    | scaling_cur | cpu_c0_core | cpu_c1_core | Real    | User
> (kHz)        | (kHz)       | (Hz)        | (Hz)        | (s)     | (s)
> -------------+-------------+-------------+-------------+---------+----------
> 1,600,000    | 1,600,000   | 1600000000  | 1600000000  | 1.80s   | 1.80s
> 1,228,800    | 1,228,800   | 1228800000  | 1228800000  | 2.33s   | 2.33s
> 1,000,000    | 1,000,000   | 1000000000  | 1000000000  | 2.88s   | 2.87s
>    819,000    |   819,000   |  819200000  |  819200000  | 3.53s   | 3.52s
>    614,400    |   614,400   |  614400000  |  614400000  | 4.72s   | 4.72s
> ----------------------------------------------------------------------------
>
> Signed-off-by: Shuwei Wu <shuwei.wu@xxxxxxxxxxx>
> ---
> Changes in v3:
> - Add a K1-specific cpufreq driver for the shared-rail, dual-clock topology
> - Use one shared CPU OPP table and one cpufreq policy for all CPUs
> - Link to v2: https://lore.kernel.org/r/20260410-shadow-deps-v2-0-4e16b8c0f60e@xxxxxxxxxxx
>
> Changes in v2:
> - Move OPP tables to dedicated k1-opp.dtsi
> - Enable OPP only on BPI-F3 with cpu-supply present
> - Link to v1: https://lore.kernel.org/r/20260308-shadow-deps-v1-0-0ceb5c7c07eb@xxxxxxxxxxx
>
> ---
> Shuwei Wu (2):
>        cpufreq: spacemit: Add K1 cpufreq driver
>        riscv: dts: spacemit: Add cpu scaling for K1 SoC
>
>   arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts |  35 +++-
>   arch/riscv/boot/dts/spacemit/k1-opp.dtsi        |  70 +++++++
>   arch/riscv/boot/dts/spacemit/k1.dtsi            |   8 +
>   drivers/cpufreq/Kconfig                         |   4 +
>   drivers/cpufreq/Kconfig.riscv                   |  15 ++
>   drivers/cpufreq/Makefile                        |   3 +
>   drivers/cpufreq/cpufreq-dt-platdev.c            |   2 +
>   drivers/cpufreq/spacemit-k1-cpufreq.c           | 251 ++++++++++++++++++++++++
>   8 files changed, 387 insertions(+), 1 deletion(-)
> ---
> base-commit: 5164e95565d3fd508ca8a95351323f5716dfb695
> change-id: 20260307-shadow-deps-3582a78aa756
> prerequisite-patch-id: 154bd4f720ce5065d58b988de8f273207b44572e
> prerequisite-message-id: <20260206-spacemit-p1-v4-0-8f695d93811e@xxxxxxxxxxxx>
> prerequisite-patch-id: 5da3e75b18291a5540d4f66d7a0600fb8975ef62
> prerequisite-patch-id: bcf41917414ecef8cf743095d130f6004c32f6a5
> prerequisite-patch-id: cfe3800f8c791ec4c63e070af9628e88e0fc31b9
> prerequisite-message-id: <20260305-k1-clk-fix-v1-1-abca85d6e266@xxxxxxxxxxx>
> prerequisite-patch-id: 7c7fb9f87dba019ece4c97c45750349a7cd28f3a
>
> Best regards,


Hi Shuwei and Vincent,

I have tested this series on the OrangePi RV2 board (4GB) on top of
linux-next (next-20260619), with the v3 cpufreq series and Vincent's
patch "k1-orangepi-rv2: Add cpu scaling" applied.

The driver works as expected: all 8 CPUs are online and share a single
policy (policy0). Writing to
/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
correctly changes the frequency for all cores simultaneously, and all
scaling_setspeed files show the same value. The frequency transitions
are smooth, and performance (tested with a simple awk loop, following
Vincent's approach) scales linearly with the set frequency.

Both of you can add my tag:

Tested-by: Gong Shuai <gsh517025@xxxxxxxxx> # OrangePi-RV2

If you send a new version, I'm also willing to test it again.

Thanks for the work.

Regards,
Shuai