[PATCH v3 06/13] dmaengine: dw-edma-pcie: Track non-LL mode in DMA data

[Koichiro Den]

The dw-edma-pcie driver copies static template data into a mutable
dw_edma_pcie_data instance before applying capability-derived updates.
Keep the derived non-LL mode in that copy as well, instead of only
tracking it in a local variable in dw_edma_pcie_probe().

This prepares for keeping capability parsing behind match data without a
separate non-LL output parameter.

No functional change intended.

Suggested-by: Frank Li <Frank.Li@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
Signed-off-by: Koichiro Den <den@xxxxxxxxxxxxx>
---
Changes in v3:
  - No changes since v2.

 drivers/dma/dw-edma/dw-edma-pcie.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
index 70ea031147d1..0ea8d59782b4 100644
--- a/drivers/dma/dw-edma/dw-edma-pcie.c
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -73,6 +73,7 @@ struct dw_edma_pcie_data {
 	u16				wr_ch_cnt;
 	u16				rd_ch_cnt;
 	u64				devmem_phys_off;
+	bool				cfg_non_ll;
 };
 
 static const struct dw_edma_pcie_data snps_edda_data = {
@@ -326,7 +327,6 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	struct dw_edma_chip *chip;
 	int err, nr_irqs;
 	int i, mask;
-	bool non_ll = false;
 
 	if (!pdata)
 		return -ENODEV;
@@ -361,14 +361,14 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 		 * the HDMA IP.
 		 */
 		if (vsec_data->devmem_phys_off == DW_PCIE_XILINX_MDB_INVALID_ADDR)
-			non_ll = true;
+			vsec_data->cfg_non_ll = true;
 
 		/*
 		 * Configure the channel LL and data blocks if number of
 		 * channels enabled in VSEC capability are more than the
 		 * channels configured in xilinx_mdb_data.
 		 */
-		if (!non_ll)
+		if (!vsec_data->cfg_non_ll)
 			dw_edma_set_chan_region_offset(vsec_data, BAR_2, 0,
 						       DW_PCIE_XILINX_MDB_LL_OFF_GAP,
 						       DW_PCIE_XILINX_MDB_LL_SIZE,
@@ -422,7 +422,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	chip->irq_mode = DW_EDMA_CH_IRQ_REMOTE;
 	chip->nr_irqs = nr_irqs;
 	chip->ops = &dw_edma_pcie_plat_ops;
-	chip->cfg_non_ll = non_ll;
+	chip->cfg_non_ll = vsec_data->cfg_non_ll;
 
 	chip->ll_wr_cnt = vsec_data->wr_ch_cnt;
 	chip->ll_rd_cnt = vsec_data->rd_ch_cnt;
@@ -431,7 +431,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	if (!chip->reg_base)
 		return -ENOMEM;
 
-	for (i = 0; i < chip->ll_wr_cnt && !non_ll; i++) {
+	for (i = 0; i < chip->ll_wr_cnt && !vsec_data->cfg_non_ll; i++) {
 		struct dw_edma_region *ll_region = &chip->ll_region_wr[i];
 		struct dw_edma_region *dt_region = &chip->dt_region_wr[i];
 		struct dw_edma_block *ll_block = &vsec_data->ll_wr[i];
@@ -458,7 +458,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 		dt_region->sz = dt_block->sz;
 	}
 
-	for (i = 0; i < chip->ll_rd_cnt && !non_ll; i++) {
+	for (i = 0; i < chip->ll_rd_cnt && !vsec_data->cfg_non_ll; i++) {
 		struct dw_edma_region *ll_region = &chip->ll_region_rd[i];
 		struct dw_edma_region *dt_region = &chip->dt_region_rd[i];
 		struct dw_edma_block *ll_block = &vsec_data->ll_rd[i];
-- 
2.51.0