[PATCH v5 0/4] Add Cix Sky1 AUDSS clock and reset support

[joakim . zhang]

From: Joakim Zhang <joakim.zhang@xxxxxxxxxxx>

The Cix Sky1 Audio Subsystem (AUDSS) groups audio-related blocks such as
HDA, I2S, DSP, DMA, mailboxes, watchdog and timer behind one Clock and
Reset Unit (CRU). The CRU is a single MMIO register block that provides
clock muxing, gating and block-level software reset lines for those
peripherals.

Clock and reset support are submitted in one series because they belong
to the same hardware block and share one devicetree node
(cix,sky1-audss-cru). The binding, clock indices and reset indices are
defined together; the clock driver maps the CRU and instantiates the
reset controller as an auxiliary driver on that node. Splitting clk and
reset across separate series would leave neither side self-contained: the
DTS node needs both providers, and the reset driver has no standalone
probe path without the clock driver.

---
ChangeLogs:
v4->v5:
  * refactor the driver, using platform_driver for clk and auxiliary_driver
    for reset.

v3->v4:
  * move both power domain and resets into parset node (audss_cru)
  * remove "simple-mfd", and change to populate the child node
  * cix,sky1-audss.h -> cix,sky1-audss-clock.h

v2->v3:
  * clk part:
    * devm_reset_control_get()->devm_reset_control_get_exclusive()
    * assert noc reset from suspend
    * clock parents changes from 6 to 4, and rename the clock names,
      explain more about this: confirm with our designer, In fact,
      there are 6 clock sources going into the audio subsystem. audio_clk1
      and audio_clk3 are redundant in design and are not actually needed
      in practice, so they are not shown here.
    * refine clocks and clock-names property
    * add detailed description of clocks
    * drop parent node from clk binding
    * drop define AUDSS_MAX_CLKS
  * reset part:
    * rename reset signal macro, remove _N
    * drop SKY1_AUDSS_SW_RESET_NUM
    * switching to compatible-style of defining subnodes in parent schema

v1->v2:
  * remove audss_rst device node since it doesn't has resource, and
    move to reset-sky1.c driver.
  * remove hda related which would be sent after this patch set accepted
  * soc componnet is okay by default from dtsi
  * fix for audss clk driver:
    * remove "comment "Clock options for Cixtech audss:""
    * add select MFD_SYSCON
    * move lock and clk_data into struct sky1_audss_clks_priv
    * const char *name -> const char * const * name
    * remove CLK_GET_RATE_NOCACHE
    * divicer -> divider
    * Reverse Christmas tree order
    * return reg ? 1 : 0; -> return !!reg;
    * return ERR_CAST(hw); -> return hw;
    * of_device_get_match_data(dev) -> device_get_match_data()
    * add lock from runtime_suspend/resume
  * loop to more mailing lists

Joakim Zhang (4):
  dt-bindings: soc: cix: add sky1 audss cru controller
  clk: cix: add sky1 audss clock controller
  reset: cix: add sky1 audss auxiliary reset driver
  arm64: dts: cix: sky1: add audss cru

 .../bindings/soc/cix/cix,sky1-audss-cru.yaml  |   92 ++
 arch/arm64/boot/dts/cix/sky1.dtsi             |   19 +
 drivers/clk/Kconfig                           |    1 +
 drivers/clk/Makefile                          |    1 +
 drivers/clk/cix/Kconfig                       |   16 +
 drivers/clk/cix/Makefile                      |    3 +
 drivers/clk/cix/clk-sky1-audss.c              | 1205 +++++++++++++++++
 drivers/reset/Kconfig                         |   14 +
 drivers/reset/Makefile                        |    1 +
 drivers/reset/reset-sky1-audss.c              |  192 +++
 .../dt-bindings/clock/cix,sky1-audss-clock.h  |   60 +
 .../dt-bindings/reset/cix,sky1-audss-reset.h  |   25 +
 12 files changed, 1629 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml
 create mode 100644 drivers/clk/cix/Kconfig
 create mode 100644 drivers/clk/cix/Makefile
 create mode 100644 drivers/clk/cix/clk-sky1-audss.c
 create mode 100644 drivers/reset/reset-sky1-audss.c
 create mode 100644 include/dt-bindings/clock/cix,sky1-audss-clock.h
 create mode 100644 include/dt-bindings/reset/cix,sky1-audss-reset.h

-- 
2.50.1