[PATCH v5 2/2] tools/testing/cxl: Enable zero sized decoders under hb0

[Richard Cheng]

The kernel now allows committed zero-size HDM decoders so BIOS can lock
empty decoders; cxl_test needs to exercise that path.

Add a mock_zero_size_decoders module parameter (default off). When set,
the special endpoints under host-bridge0 (cxl_mem.0 and cxl_mem.4)
commit decoders 1 and 2 as zero-size + locked above the decoder[0]
auto-region, mirrored on the parent switch and host bridge. The mocks
take a real zero-size DPA reservation, like enumeration of real
hardware, so commit_end lands on a zero-size decoder and the
reservation, poison-by-endpoint, and teardown paths all run.

Signed-off-by: Vishal Aslot <vaslot@xxxxxxxxxx>
Signed-off-by: Richard Cheng <icheng@xxxxxxxxxx>
---
v4->v5:
      - Mirror the v5 core semantics: mock zero-size decoders take a real
        zero-size DPA reservation via devm_cxl_dpa_reserve() so
        dpa_res/hdm_end/cxled->part match real hardware enumeration and
        the poison-by-endpoint walk reaches commit_end.
      - Set cxled->state = CXL_DECODER_STATE_AUTO to match
        init_hdm_decoder()'s fall-through (undoes the v2 switch to
        MANUAL).
      - cxld_registry_restore(): reserve unconditionally for enabled
        endpoint decoders; enabled now implies reserved, sized or not.

v3->v4:
     - No change.

v2->v3:
      - Gate the zero-size + locked decoder injection behind a new
        mock_zero_size_decoders module parameter (default off). v2
        applied it unconditionally on the host-bridge0 auto-region
        endpoints, which the region test suite reuses, regressing 7 of
        17 cxl unit tests; defaulting off leaves the shared topology
        untouched.

v1->v2:
      - Replace second_decoder(), third_decoder() with a single
        match_decoder_by_index() helper, so all lookups share one
        matcher.
      - Use DEFINE_RANGE() for the empty range instead of an open-coded
        struct.
      - Set cxled->state = CXL_DECODER_STATE_MANUAL rather than
        STATE_AUTO.
      - Set CXL_DECODER_F_LOCK on the mock zero-size decoders to model
        the BIOS-burns-slots case.
---
 tools/testing/cxl/test/cxl.c | 100 ++++++++++++++++++++++++++++++-----
 1 file changed, 86 insertions(+), 14 deletions(-)

diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c
index 418669927fb0..33cea0116a71 100644
--- a/tools/testing/cxl/test/cxl.c
+++ b/tools/testing/cxl/test/cxl.c
@@ -17,6 +17,7 @@
 static int interleave_arithmetic;
 static bool extended_linear_cache;
 static bool fail_autoassemble;
+static bool mock_zero_size_decoders;
 
 #define FAKE_QTG_ID	42
 
@@ -841,14 +842,13 @@ static int cxld_registry_restore(struct cxl_decoder *cxld,
 		cxld_copy(cxld, &td->cxled.cxld);
 		cxled->state = td->cxled.state;
 		cxled->skip = td->cxled.skip;
-		if (range_len(&td->dpa_range)) {
-			rc = devm_cxl_dpa_reserve(cxled, td->dpa_range.start,
-						  range_len(&td->dpa_range),
-						  td->cxled.skip);
-			if (rc) {
-				init_disabled_mock_decoder(cxld);
-				return rc;
-			}
+		/* enabled endpoint decoders hold a reservation, sized or not */
+		rc = devm_cxl_dpa_reserve(cxled, td->dpa_range.start,
+					  range_len(&td->dpa_range),
+					  td->cxled.skip);
+		if (rc) {
+			init_disabled_mock_decoder(cxld);
+			return rc;
 		}
 		port->commit_end = cxld->id;
 	}
@@ -1041,16 +1041,49 @@ static void default_mock_decoder(struct cxl_decoder *cxld)
 	WARN_ON_ONCE(!cxld_registry_new(cxld));
 }
 
-static int first_decoder(struct device *dev, const void *data)
+static int match_decoder_by_index(struct device *dev, const void *data)
 {
+	int target_id = *(const int *)data;
 	struct cxl_decoder *cxld;
 
 	if (!is_switch_decoder(dev))
 		return 0;
 	cxld = to_cxl_decoder(dev);
-	if (cxld->id == 0)
-		return 1;
-	return 0;
+	return cxld->id == target_id;
+}
+
+/*
+ * Mock a committed, locked, empty decoder
+ * (CXL r4.0 8.2.4.20.12). Gated by the mock_zero_size_decoders module
+ * param so the default cxl_test topology, shared by the region test
+ * suite, is left undisturbed.
+ */
+static void size_zero_mock_decoder_ep(struct cxl_decoder *cxld, u64 base)
+{
+	struct cxl_endpoint_decoder *cxled = to_cxl_endpoint_decoder(&cxld->dev);
+
+	cxld->hpa_range = DEFINE_RANGE(base, base - 1);
+	cxld->interleave_ways = 2;
+	cxld->interleave_granularity = 4096;
+	cxld->target_type = CXL_DECODER_HOSTONLYMEM;
+	cxld->flags = CXL_DECODER_F_ENABLE | CXL_DECODER_F_LOCK;
+	cxled->state = CXL_DECODER_STATE_AUTO;
+	/* decoder[0] reserved [0, size/2); empty decoders sit at that watermark */
+	devm_cxl_dpa_reserve(cxled, mock_auto_region_size / 2, 0, 0);
+	cxld->commit = mock_decoder_commit;
+	cxld->reset = mock_decoder_reset;
+}
+
+static void size_zero_mock_decoder_sw(struct cxl_decoder *cxld, u64 base,
+				      int level)
+{
+	cxld->flags = CXL_DECODER_F_ENABLE | CXL_DECODER_F_LOCK;
+	cxld->target_type = CXL_DECODER_HOSTONLYMEM;
+	cxld->interleave_ways = level == 0 ? 2 : 1;
+	cxld->interleave_granularity = 4096;
+	cxld->hpa_range = DEFINE_RANGE(base, base - 1);
+	cxld->commit = mock_decoder_commit;
+	cxld->reset = mock_decoder_reset;
 }
 
 /*
@@ -1131,7 +1164,7 @@ static bool mock_init_hdm_decoder(struct cxl_decoder *cxld)
 	 * See 'cxl list -BMPu -m cxl_mem.0,cxl_mem.4'
 	 */
 	if (!is_endpoint_decoder(&cxld->dev) || !hb0 || pdev->id % 4 ||
-	    pdev->id > 4 || cxld->id > 0) {
+	    pdev->id > 4 || cxld->id > (mock_zero_size_decoders ? 2 : 0)) {
 		default_mock_decoder(cxld);
 		return false;
 	}
@@ -1145,6 +1178,20 @@ static bool mock_init_hdm_decoder(struct cxl_decoder *cxld)
 	base = window->base_hpa;
 	if (extended_linear_cache)
 		base += mock_auto_region_size;
+
+	/*
+	 * With mock_zero_size_decoders, decoders 1 and 2 of the special
+	 * endpoints mock committed, locked, empty decoders above the
+	 * decoder[0] auto-region (CXL r4.0 8.2.4.20.12). commit_end then
+	 * points at a zero-size decoder, exercising the zero-size
+	 * reservation and poison-by-endpoint code paths.
+	 */
+	if (cxld->id == 1 || cxld->id == 2) {
+		size_zero_mock_decoder_ep(cxld, base);
+		port->commit_end = cxld->id;
+		WARN_ON_ONCE(!cxld_registry_new(cxld));
+		return false;
+	}
 	cxld->hpa_range = (struct range) {
 		.start = base,
 		.end = base + mock_auto_region_size - 1,
@@ -1168,9 +1215,11 @@ static bool mock_init_hdm_decoder(struct cxl_decoder *cxld)
 	 */
 	iter = port;
 	for (i = 0; i < 2; i++) {
+		int id = 0;
+
 		dport = iter->parent_dport;
 		iter = dport->port;
-		dev = device_find_child(&iter->dev, NULL, first_decoder);
+		dev = device_find_child(&iter->dev, &id, match_decoder_by_index);
 		/*
 		 * Ancestor ports are guaranteed to be enumerated before
 		 * @port, and all ports have at least one decoder.
@@ -1214,6 +1263,26 @@ static bool mock_init_hdm_decoder(struct cxl_decoder *cxld)
 
 		cxld_registry_update(cxld);
 		put_device(dev);
+
+		if (!mock_zero_size_decoders)
+			continue;
+
+		/*
+		 * Mirror the endpoint: commit the next two switch decoders
+		 * as zero-size + locked so the empty-decoder layout extends
+		 * end-to-end through the switch and host bridge.
+		 */
+		for (id = 1; id <= 2; id++) {
+			dev = device_find_child(&iter->dev, &id,
+						match_decoder_by_index);
+			if (WARN_ON(!dev))
+				continue;
+			cxld = to_cxl_decoder(dev);
+			size_zero_mock_decoder_sw(cxld, base, i);
+			iter->commit_end = id;
+			cxld_registry_update(cxld);
+			put_device(dev);
+		}
 	}
 
 	return false;
@@ -2049,6 +2118,9 @@ module_param(extended_linear_cache, bool, 0444);
 MODULE_PARM_DESC(extended_linear_cache, "Enable extended linear cache support");
 module_param(fail_autoassemble, bool, 0444);
 MODULE_PARM_DESC(fail_autoassemble, "Simulate missing member of an auto-region");
+module_param(mock_zero_size_decoders, bool, 0444);
+MODULE_PARM_DESC(mock_zero_size_decoders,
+		 "Mock committed, locked, empty decoders under host-bridge0");
 module_init(cxl_test_init);
 module_exit(cxl_test_exit);
 MODULE_LICENSE("GPL v2");
-- 
2.43.0